Contact Platform Support
Help CenterClear Coat Series Automotive Paints Supplier
Related Products
Clear Coat Series
Automotive Paints Supplier
Product Name/Model:Clear Coat Series
Characteristic:
1. MSK-8000Clear Coat:Two- component 880 clear coat with super-high density and solid,
deep rich gloss, high hardness, excellent weathering and chemical resistance. Applies to
senior cars, suitable for overall refinish, quality and performance compare favourably with
many imported clear Coats
2. GH-5000Clear Coat:Two-component fast drying 5000 clear coat with excellent gloss, high
hardness, excellent weathering and chemical resistance.
3. GH-3000Clear Coat:High gloss 380 clear coat, with high richness, good levelling property,
easy construction, high hardness, excellent chemical and weathering resitance. Be paint film
in lower temperature. Application in Medium, Senior car, MPV, Bus.
4. MSK-2000Clear Coat:High gloss and high hardness two-component 280 clear coat, easy
construction, fast dry, good pretective power and weathering resistance, save cost and time
during refinish.Application in standard car, construction machinery.
Substrates |
1K Basecoat. |
||||
Mixing Ratio |
Clear Coat |
Hardener |
Thinner |
||
2 |
1 |
0.2-0.5 |
|||
A 、＜15℃ ：90 Fast Thinner； B 、 15-30℃：91 Standard Thinner； C、＞30℃：92Slow Thinner | |||||
Spray Viscosity |
16-19s to drop off, in 4# viscosity cup at 25°C, |
||||
Pot-Life |
At 25℃ |
||||
ReTreatment |
There are particles or runs after spray, sand affected area with P2000 sand paper |
||||
Spray Gun Set Up |
Gravity Feed: 1.2-1.5mm 4-5kg/cm² |
||||
Spray Technology |
Coats&Thickness: 2-3 coats, total 25-35um |
||||
Drying Time |
Temperature |
Dust Free |
Tack Free |
Dry to Handle |
Dry to Test |
25°C |
30 minutes |
2 hours |
8 hours |
6 days |
|
70°C |
5 minutes |
10 minutes |
25 minutes |
60 minutes |
|
Shelf Life |
2 years in original sealed can, cool and dry place at 20℃. |
||||
Package |
5L×4 or 2.5L×8 or 5L+2.5L+1L |
||||
Note:
1. At temperature lower than 15°C, air-dry at ambient temperature is not recommended. Better to allow a full bake at 60°C.
2. At ambient temperature higher than 30℃, add appropriate Retarder Solvent into thinner to avoid blushing. For more details, please refer to technical data sheet of Retarder Solvent.
3. The products mixed with hardener should be used up soon and can not be restore for future use;clean equipments immediately with thinner after application, otherwise it is very difficult to be cleaned after dry.
Send Inquiry to This Supplier
You May Also Like
-
MSK-6000 Extra Fast Clear CoatUS$ 1 - 100MOQ: 100 Pieces -
2K Series HardenerUS$ 1 - 100MOQ: 100 Pieces
-
MSD-0912 1K Binder And MSD-0920 Flip ControllerUS$ 1 - 100MOQ: 100 Pieces
-
MSD-0910 DegreaserUS$ 1 - 100MOQ: 100 Pieces
-
BC1K Silver ColorsUS$ 1 - 100MOQ: 100 Pieces
-
BC1K Pearl ColorsUS$ 1 - 100MOQ: 100 Pieces
-
BM1K Silver ColorsUS$ 1 - 100MOQ: 100 Pieces
-
BM1K Silver Colors BOYET SeriesUS$ 1 - 100MOQ: 100 Pieces
-
BM1K Silver Colors BOYET SeriesUS$ 1 - 100MOQ: 100 Pieces
-
BYTF605-Epoxy PrimerUS$ 1 - 100MOQ: 100 Pieces
