Home > Products > Other Cylinders > 5L Medical Oxygen Gas Cylinder
5L Medical Oxygen Gas Cylinder
- 50000 Unit / Units per Month
- SHANGHAI
- T/T Credit Card
- CO2 4.5(L) Fire Extinguisher Aluminum Cylinder ,stainless steel fire extinguisher cylinder Small Portable Oxygen Cylinder
- 3(L) Dry Powder Fire Extinguisher Cylinder stainless steel fire extinguisher cylinder Small Portable Oxygen Cylinder Fire exting
- CO2 LWH232-30.0-174 Aluminium fire extinguisher cylinder
- LWH111-1.5-174 Aluminium cylinder blocks
- CO2 LWH203-20.0-174 Trolley for oxygen cylinder
- CO2 LWH159-9.0-174 Aluminium cylinder manufacturing machine
Product Details
Brand Name: | SEFIC | Place of Origin: | Shanghai, China | Model Number: | SEFIC-5L |
Use: | Medical Gas | Pressure: | High |
Product Description
Seamless Steel Gas Cylinder
(1) Gas: Medical Gas
2) 5L
(3) 150BAR
(4) GB/DOT/TPED
Cylinder Introduction:
A gas cylinder is a pressure vessel used to store gases at above atmospheric pressure. High pressure gas cylinders are also called bottles.
Nomenclature differences
In the United States, "bottled gas" typically refers to liquefied petroleum gas. "Bottled gas" is sometimes used in medical supply, especially for portable oxygen tanks. Packaged industrial gases are frequently called "cylinder gas", though "bottled gas" is sometimes used.
The United Kingdom and other parts of Europe more commonly refer to "bottled gas" when discussing any usage whether industrial, medical or liquefied petroleum. However, in contrast, what the United States calls liquefied petroleum gas is known generically in the United Kingdom as "LPG"; and it may be ordered by using one of several trade names, or specifically as butane or propane depending on the required heat output.
Design codes and application standards along with the cost of materials dictated the choice of steel with no weldings for most gas cylinders, treated to be anti corrosive. There have been some newly developed lightweight gas cylinders from composite materials. Due to the very high tensile strength of carbon fiber, these vessels can be very light, but are much more difficult to manufacture
Regulations and cylinder testing
The transportation of high pressure cylinders is regulated by many governments throughout the world. Various levels of testing are generally required by the governing authority for the country in which it is to be transported. In the United States, this authority is the United States Department of Transportation (DOT). Similarly in the UK, the European transport regulations (ADR) are implemented by the Department for Transport (DfT). For Canada, this authority is Transport Canada (TC). Cylinders may have additional requirements placed on design and or performance from independent testing agencies such as Underwriter's Laboratory (UL). Each manufacturer of high pressure cylinders is required to have an independent quality agent that will inspect the product for quality and safety.
Within the UK the "competent authority" — the DfT — implements the regulations and appointment of authorised cylinder testers is conducted by UKAS, who make recommendations to the VCA for approval of individual bodies.
There are a variety of tests that may be performed on various cylinders. Some of the most common types of tests are hydrostatic test, burst test, tensile strength, Charpy impact test and pressure cycling.
During the manufacturing process, vital information is usually stamped or permanently marked on the cylinder. This information usually includes the type of cylinder, the working or service pressure, the serial number, date of manufacture, the manufacture's registered code and sometimes the test pressure. Other information may also be stamped depending on the regulation requirements.
High pressure cylinders that are used multiple times — as most are — can be hydrostatically or ultrasonically tested and visually examined every few years. In the United States, hydrostatic/ultrasonic testing is required either every five years or every ten years, depending on cylinder and its service. Helium gas cylinders have the highest pressures possible when full, around 1000 atmospheres.
Safety and standards
Because the contents are under pressure and are sometimes hazardous, there are special safety regulations for handling bottled gases. These include chaining bottles to prevent falling and breaking, proper ventilation to prevent injury or death in case of leaks and signage to indicate the potential hazards. Installing and replacing gas cylinders should be done by trained personnel. If a compressed gas cylinder tips over, causing the valve block to be sheared off, the rapid release of high pressure gas may cause the cylinder to be violently accelerated, potentially causing property damage, injury, or death. To prevent this, cylinders are normally secured to a fixed object or transport cart with a strap or chain.
In a fire, the pressure in a gas cylinder rises in direct proportion to its temperature. If the internal pressure exceeds the mechanical limitations of the cylinder and there are no means to safely vent the pressurized gas to the atmosphere, the vessel will fail mechanically. If the vessel contents are ignitable, this event may result in a "fireball". If the cylinder's contents are liquid, but become a gas at ambient conditions, this is commonly referred to as a Boiling Liquid Expanding Vapour Explosion (BLEVE).
Medical gas cylinders in the UK and other countries have a seal of Wood's metal between the valve block and the cylinder body. This seal melts at a comparatively low temperature (70°C) and allows the contents of the cylinder to escape in a controlled fashion, lessening the risk of explosion.
More common pressure relief devices are of a simple burst disc type. In these, a small burst disc is installed in the back of the valve. A burst disc is a small metal gasket engineered to rupture at a pre-determined pressure. Some burst discs are backed with a low-melting-point metal, so that the valve must be exposed to excessive heat before the burst disc can rupture.
The Compressed Gas Association sells a number of booklets and pamphlets on safe handling and use of bottled gases.
Cylinders should be properly labeled and securely stored. Substances that may react with each other, e.g., oxidizers and flammable materials, should not be stored in close proximity.
1. CYLINDER PRODUCTION:
2. CYLINDERS MARK:
3. CERTIFICATE:
4. CYLINDER PACKING AND LOADING:
5. Pls send us enqury if you have any demand on it.
Contact Us
- Eternal Industry Co., Ltd.
Acetylene cylinder | Argon cylinder | CO2 cylinder | Cylinder Bundle |
Gas Product | Helium cylinder | Nitrogen cylinder | Other Cylinders |
Oxygen cylinder | Ungrouped | Valve |
- CO2 LWH159-9.0-174 Oxygen tank for sale
- LWH232-30.0-174 High altitude special oxygen bottle
- High altitude special oxygen bottle
- MT-2/4-4.0 Ambulance oxygen aluminium cylinder
- MT-4-6.3 Hospital oxygen cylinder trolley (2L/2.8L/3.2L/4L/6.3L/10L)
- MT-2/4-2.0 High altitude special oxygen bottle,Small Oxygen Cylinder
- MT-2/4-4.0 High altitude special oxygen bottle,Small Oxygen Cylinder
- LOX/LIN/LAR/LCO2/CNG/LNG Seamless Steel Gas Cylinder
- Chlorine Gas Cylinder,Seamless Steel Gas Cylinder,Gas Cylinder Types
- ISO9808-1 Standard Seamless Steel High Pressure Oxygen Gas Cylinder
- 3L-80L High Pressure Oxygen Nitrogen Argon Hydrogen Helium CO2 Gas Cylinder
- Seamless Steel Gas Cylinder,Chlorine Gas Cylinder,Oxygen Cylinder Price
- High Pressure Aluminium alloy cylinder CO2 Gas Cylinder
- ISO9809/TPED/DOT Chlorine Gas Cylinder,Seamless Steel Gas Cylinder,
- ISO9809/TPED/DOT Chlorine Gas Cylinder, Oxygen Cylinder Price
- CO2 Aluminum bottles wholesale
- CHING/GB5099 Industrial Gases, High Pressure Seamless Steel Cylinder
- DOT Industrial Gases, High Pressure Seamless Steel Cylinder
- Chlorine Gas Cylinder,Seamless Steel Gas Cylinder,Welding Oxygen Cylinder Filling Oxygen Gas Cylinder
- Seamless Steel Gas Cylinder,Propane Gas Cylinders,Filling Oxygen Gas Cylinder
- CHINA/GB5099 Commercial Industrial Gas Cylinders
- CHINA/GB5099 High Pressure Seamless Steel GAS CYLINDER
- CHINA/GB5099 OXY/AR/CO2/C2H2/LHG/CNG/H2 Steel Gas Cylinder
- ISO9809 OXY/AR/CO2/C2H2/LHG/CNG/H2Steel GAS CYLINDER
Popular Searches
- humidifier bottle
- bottle of polycarbonate
- Welded Gas Cylinder
- oxygen humidifier bottles
- refillable helium tanks balloons
- medical humidifier bottle
- oxygen humidifier bottle
- high quality scba
- Ar Gas
- cilindros de gas
- gnc tank
- small oxygen bottles
- Stock Cylinder
- acetylen
- acetylen cylinder price
- acetylen cylinder
Find Similar Products By Category
- Packaging & Printing > Gas Cylinders
- Buy on GoldSupplier.com
- How to Buy
- Browse by Catagories
- Browse by Hot Regoins
- Private Sourcing Events
- Sell on GoldSupplier.com
- How to Sell
- Post Products
- Manage Products
- Manage Groups
- About
- About Us
- Link to Us
- Contact Us
- Sitemap
- Please Enter your Email Address
- Please enter the content for your inquiry.
We will find the most reliable suppliers for you according to your description.
Send Now-
sales
Welcome to my shop! Glad to serve you!Please send your question!
Your message has exceeded the limit.
Your message has exceeded the limit.
-
-
Your inquiry content must be between 20 to 5000 characters.Send Now.
-
Please input the mailbox.
-