Large Output Rice Milling Machine With Separation

 The rice milling part of the machine can process rice into rice at one time, and at the same time complete the separation of rice, alfalfa and broken rice.

Use of rice milling machine
1. Before starting the machine, strictly check whether the parts of the machine are loose or not. Open the rice cover to adjust the gap between the rice knife and the rice roll. The feeding end is 5 mm, the discharging end is 2 mm, and the screw is tight after adjustment. Gumi knife.

2. Close the rice cover and press the rice nut cover with the pressure nut handwheel. Use the rotating pulley to take a few turns. If there is collision or friction, it must be removed before starting. Safety guards must be installed for personal safety.

3. After the inspection is completed, turn on the machine for 5-10 minutes. If there is no abnormality, it can work. At this time, the inlet and outlet should be closed.

4. Do not reach into the machine during use to avoid personal injury. First slowly open the feed switch (insert board). When the rice is almost filled with the rice milling chamber, slowly open the discharge switch (insert plate), adjust the switch according to the whiteness and maximum flow of the required rice.

5. The automatic separation type needs to adjust the air volume of the air outlet. The first time the rice is to be properly closed, the second time is adjusted appropriately until the rice is innocent.

6. Bundle the collection bag on the discharge port to prevent the dust from flying.

Type1:brown rice white rice all-in one machine

Technical Parameters

 Type 2 :Brown Rice Machine

Small and energy-efficient rubber roller machine (commonly known as shelling machine). It is small in size, light in weight, energy efficient, compact, easy to operate and light in weight. It can be used by connecting single-phase lighting, which is very suitable for users in remote mountainous areas with low voltage.
 

Use of Shibuya machine (brown rice machine)
1. Use: This machine is mainly used for shelling of rice, and can separate rice husk from the coarse mixture of grain.
  2. Construction: The machine is composed of hopper feed switch, fast and slow rubber roller, separator, gear box, etc.

Technical Parameters