Contact Platform Support
Help CenterT4 Steel Grating Stair Treads
Related Products
T4 Steel Grating Stair Treads,customized Steel Grating Stair Treads,customized Steel Grating Stair Treads Supplier
customized Steel Grating Stair Treads
customized Steel Grating Stair Treads Supplier
Our company produces complete steel ladders with hand railings which are made of grating treads. According to whether the nosing to be used and the methods of mounting to stringers, grating treads are classified into four types, expressed as T1,T2,T3andT4. In view of economics it is advisable to use the recommended lengths and widths below
T1 Welded Fixing without Nosing
Type of Stair Treads |
Checkered plate nosing |
Structure Characteristics |
T4 |
YES |
For anchoring with bolts, the two ends are closed with 65 x 5 mm flat bars with holes with checkered plate nosing |
Recommended Stair Treads Width
T1, T2, T3,T4 Bearing bar at 30mm pitch |
95 |
125 |
155 |
185 |
215 |
245 |
275 |
T1, T2 Bearing bars 40mm pitch |
125 |
165 |
205 |
245 |
285 |
||
T3, T4 Bearing bars 40mm pitch |
115 |
155 |
195 |
235 |
275 |
||
Fixing hole centers |
45 |
75 |
100 |
150 |
|||
Grating Size
Grade |
CN: Q235, Q345, USA: A36, UK: 43A |
Standard |
CN: YB/T4001-1998, USA: ANSI/NAAMM, UK: BS4592-1987, AUS1657-1988, JJS |
Certification |
CE, GOST, ISO9001, ISO14001, HSE |
Bearing bar type |
Plain, Serrated (tooth-like), I bar (I section), Serrated-I |
Bearing bar size |
20X5, 25X3, 25X4, 25X5, 30X3, 30X4, 30X5, 32X3, 32X5, 40X5, 50X4.75X8,100X8mm,etc |
Bearing bar pitch |
20,25,30,32.5,34.3,40,50,60,62,65mm |
Cross bar size |
5X5, 6X6, 8X8mm (twisted bar)/5, 6, 8mm ( round bar) |
Cross bar pitch |
0, 50, 60, 65, 76, 100, 101.6, 120, 130mm, etc. |
Panel size |
3x20ft,3x24ft,3x30ft,5800x1000,6096x1000,6400x1000, as request |
Surface treatment |
Untreated, hot dip galvanized, cold dip galvanized, painted, powder coated,pickling, electrolytic polishing, or as customers' requirement. |
Galvanization Standard |
CN: GB/T13912, USA: ASTM (A123), UK: BS729 |
Color |
Silver/Black |
Application |
petroleum and chemical, port, power, transportation, papermaking, medicie, steel and iron, food, municipality, real estate, manufacturing |
SURFACE TREATMENT
Three ways of surface treatment can be adopted: galvanizing, painting and untreated, of which hot- dip galvanizing is recommended. | |
Hot-dip galvanizing |
It is a form of galvanization. It is a process of coating steel grating with a thin zinc layer. By passing the metal through a molten bath of zinc, the average coating thickness is 70μm when steel bards range from 3mm to 5mm in thickness. |
Painting |
It is also a good way to get surface protective film. Coating thickness depends on the customer's choice. |
Send Inquiry to This Supplier
You May Also Like
-
Hot Dip Galvanized Steel GratingUS$ 1 - 100MOQ: 5 Short Tons -
Untreated Steel Grating ManufacturerUS$ 1 - 100MOQ: 5 Short Tons
-
T3 Steel Grating Stair TreadsUS$ 1 - 100MOQ: 5 Short Tons
-
Port Steel Grating Stair Treads SupplierUS$ 1 - 100MOQ: 5 Short Tons
-
Steel Grating Stair Treads for TransportationUS$ 1 - 100MOQ: 5 Short Tons
-
Customized Steel Grating Stair TreadsUS$ 1 - 100MOQ: 5 Short Tons
-
Black Steel Grating Stair TreadsUS$ 1 - 100MOQ: 5 Short Tons
-
Food Steel Grating Stair TreadsUS$ 1 - 100MOQ: 5 Short Tons
-
Serrated Bar Steel GratingUS$ 1 - 100MOQ: 5 Short Tons
-
Press Locked Steel GratingUS$ 1 - 100MOQ: 5 Short Tons
