10 inch 200m3 River Sand Dredging Machine/ Cutter Suction Dredger/Small Dredger Machine

Cutter suction dredger introduction

The dredger we produce is self-propelled or non self-propelled,portable cutter suction dredger. The hull uses dismantle and box-like structure, Its dismantle type can be assembly at working place easily and be transported by road, railway and container accordingly, convenient in installation and working place moving from one to another. The power system can be designed to electric system or diesel engine driving system according to customers'requirements.Equipment on the cutter suction dredger are as bellows: traversing device, cutter ladder lifting device, spuds and deck crane. The working process is as following: the cutter head cut the sand and mud underwater to mixture of slurry, then through dredging pump to the pipeline on dredger; at the end the slurry will be discharged by pipeline on land to the required place. 

Functions of cutter suction dredger/river sand dredging machine: dredging river, dredging sand, desilting, reclamation for channels and land, and building roads.

Working site of cutter suction dredger: sea, port, lake, and river.

Soil conditions: relative hard soil, harden sand, sludge, sea sand, river sand, clay, mud, and so on.

Details description of JM Cutter suction dredger

Design__Cutter suction dredger design meets the requirements and regulations of CCS, BV and ABS , which are belonging to IACS.

The technology refer to Holland IHC, and dredger can be custom made according to customers' requirements.

Chief engineer Gan attended the “Local cutter dredger design study on IHC Beaver” in 2000.

Steel plate__ Raw material is marine use material which meets the requirements of CCS., and all plates are under sand blasting process.

Hydraulic system__Hydraulic oil pipes made by pipe bending machine to decrease the welding points so that can keep system stability. When the oil pipe finish, should be acid picking and  phosphating treatment to keep whole system clean and stability.

Dredging pump__flow passage components use High wear resistant alloy Cr27 to prolonged the pump service life, pump shaft seal use packing seal which is easy to maintain , and anti-friction bearings are from Japanese brand NSK.

Culture :     Integrity        Profession         Innovation  

Weifang Jin Meng Dredger Co.,Ltd. located in Qingzhou, Weifang City, is a manufacturer for cutter suction dredger, work boat and gold dredging equipment,which is specialized in dredger researching, designing, production and sales.

We have professional R&D department, CAD drawing design center, quality control department and after-sales service department. Our company has more than over 500 employees, including 5 professional senior engineers on dredger building and researching, 16 designers on machinery construction, 8 engineers on quality inspecting and controlling as well as 10 after-sales service engineers. 

Cutter suction dredger under production in the work shop

A. Hull Weld

1. Steel plates- Rust removal ,Antiseptic treatment.

2. Carbon-dioxide arc welding and Submerged-arc welding.

3. Tightness test and inspection

B. Deck machinery installation

C. Main engine and auxiliary engine location installation.

D. Hydraulic system installation

1. The pickling , phosphating treatment of the hydraulic pipes.

E. The electrical installation

F. The Whole machine test

Cutter suction dredger packed in bulks or containers and transpoarted by trucks on road

There are two ways for river cutter dredger being transported, if the sand dredger size smaller than JMD350, it is easy to transported by containers; if the river cutter dredger size is larger than JMD350, it will be transported by bulks. The river cutter dredger structure is dismuntable and assembled so that can be easy transported by trucks on road.

1) Party A will send 2 qualified and experienced engineers to Party B's workplace to direct and guide the dredger's installation and training operating, if needed. .

2) To assist in the installation; Party B will arrange for 6-8 workers to aid these engineers.

3) Installation and test period is expected to take 10-15days for one dredger with full ready of installation.

4) Party A's engineers must arrive at Party B's designated place within 3 days after the dredger has been transported to the workplace.

5) After the dredger's complete installation, Party B Can coordinate Party A's engineers to test dredger's performance in appropriate water. Dredger Test includes: operation of the dredging, hydraulic and electrical systems, running of the dredger's outfitting equipment, and Party A's engineers' debugging of the dredger's natural work.

Welcome to visit our factory for dredger custom made

The dredgers can be custom made according to customers’ requirements:

1. Anchor booms installation

2. Spud carriage

3. Dredger position of 5 anchors.

4. Hydraulic driving for spud flat down(to pass and transport on water safely).

5. Make the dredger with extra dredging pump underwater to deepen dredging depth for 20-30m underwater and slurry concentration is more than 30%.

6. Make the dredger with booster station to further the discharge distance.