CE approved cnc glass cutting machine by water jet

The APW glass cutting machine is widely used for cutting a wide variety of glass products, from ultra-thin panels to thick multi-layered bullet-proof panels for vehicles and buildings to panels for stained glass windows. The APW has the capability perform a low pressure pierce that automatically switches to high pressure mode to continue the tool path. This means that even the most brittle glass can easily be pierced to create a starting point and yet still be cut at maximum speed. The only glass that can’t be cut is tempered glass, designed to shatter into tiny pieces if cut or broken.

A cnc glass cutting machine is made up of 4 key components, that is Intensifier pump; Cutting table; CNC controller; Auto abrasive feeder
Intensifier Pump	Max. water pressure	410Mpa
	Continuous working pressure	360-380Mpa
	Max. oil pressure	20Mpa
	Motor power	37KW/50HP
	Cutting water inlet pressure	0.3Mpa
	Cooling water inlet pressure	0.3Mpa
	Power supply	380V/50HZ/3PH
	Max. flow rate	3.7L/Min
	Oil tank volum	30Gal.(114L)
Cutting Table	Structural style	Bridge style
	Cutting area	3000x2000x150mm
	Max. moving speed for X/Y-axis	6000mm/min
	Max. moving speed for Z-axis	1000mm/min
	Load bearing	500kg/ Squre meter
	Control accuracy	0.01mm
	Cutting accuracy	0.1mm
	Power supply	220V
	Way of drive	AC Servo
	X/Y-axis structure	Aluminum structure
Cutting Head	Mode	3-axis
	Max. orifice diameter	0.33mm
	Max. nozzle diameter	1.02mm
	Z-axis step motor	0.9N.M
CNC Controller	15 inch LCD monitor
	Support DXF and NC code file
	Software: Windows XP
	Resistance of the shoch and electro-magnetic
	The key function
	Forward & backward processing function		Even pace control function
	Small arcs speed auto processing function		Circle processing function
	Partial and smooth processing modes
Abrasive Feeder	Max. inlet air pressure	0.6Mpa
	Min. inlet air flow	0.028m3/min
	Abrasive capacity	225KG
	Features
	Air valve to prevent jams and breakages	Self sealing
	Auto control with CNC auxiliary function	Slightly adjust the flow

Dual-Core Waterjet Debut

APW pioneered “Dual-Core” waterjet, which integrated SIEMENS motor, imported REXROTH hydraulic pump and hydraulic valves assembly, American A&V intensifier, American high pressure tube and stainless steel water tank. This dual intensifiers design (for cnc glass cutting machine ) represents another landmark in APW history.

They has been widely used in all APW waterjet series. UP to now, APW is still the only waterjet manufacturer holding this advanced technology in China.

Imported components

We adopt the imported components like Rexroth hydraulic pump; USA intensifier; Siemens motor; Omron PLC; Yaskawa servo driver, Yuken direction control valves etc. The whole parts of intensifier is assembled in USA (not just some parts), most of the smaller parts are also imported from USA to ensure its good stability during cutting, durability and long working service life.

Abrasive waterjet cutting technology is a great method for cutting glass because it allows for contours and shapes that cannot be achieved with other cutting machines at a reasonable cost. From artistic tabletop inlays to detailed stained glass designs, mirrors, glass ornaments, replacement windows for antique cars, and more, there’s almost no glass cutting application that a waterjet cutting machine from APW Waterjet can’t tackle.

The features of cnc glass cutting machine

1. Allows for complex and fine profiles that cannot be achieved with other methods at reasonable costs
2. Glass does not crack during processing
3. Suitable for the cutting of various glass types
4. Cuts glass panels up to 20 cm in thickness
5. No need to change tool when changing from thin glass to thick glass
6. No or reduced need for reworking of the cut edge
7. No wastage of material, narrow cutting gap
8. Efficient method to produce holes in glass
9. No need for resharpening the tool
(Not suitable for the processing of hot glass.)

The cutting speed for cnc glass cutting machine

The cutting speed of cnc glass cutting machine varies depending on the thickness, desired cut quality, water pressure and the machine itself configuration, Generally for APW waterjet, you could find the following speed just for your reference.

All-Powerful Science & Technology Stock Co.,Ltd, a Sino-US joint venture, which was established at 2001 and located in the Export Processing Zone of Liaoning Provence. APW is the largest new high-tech enterprise integrated the research and development of ultra-high pressure waterjet cutting machine, and an important base for developing high-end ultra-high pressure waterjet industry of China.

Our mission is to help our customers solve their manufacturing challenges and achieve their highest level of productivity, precision and accuracy.

More information about APW waterjet CNC glass cutting machine price pls contact us at hotline: +86-024-24699053