Home > Products > Hydrophobic self-cleaning coating > Colorless transparent antibacterial self-cleaning coating (hydrophobic type)
Colorless transparent antibacterial self-cleaning coating (hydrophobic type)
- 100000 Kilogram / Kilograms per Month
- shanghai
- T/T L/C D/P D/A Credit Card PayPal Other Cash Escrow
- 7 days
Product Details
Brand Name: | HuZheng | Place of Origin: | China | Model Number: | AGS-KT30 |
State: | Liquid Coating | Usage: | Building Coating, Car Paint, Furniture Paint | Main Raw Material: | Other, Silane |
Application Method: | Brush |
Product Description
【product description】
AGS-KT30 is a nano-silver antibacterial coating. It has the advantages of colorless and transparent, super water and oil repellent performance, high surface hardness, inorganic long-lasting spectrum antibacterial, etc. It pays attention to green environmental protection, health and safety, and achieves self-cleaning of products. At the same time, it also achieves permanent antibacterial, reflecting the best combination of functionality, usability and value.
【Product Features】
Indicator name
Performance parameter
Exterior
Colorless transparent or light yellow solution
Solid content (silane)
Min 1.7%
Solid content (Ag)
Min 30ppm
PH value
6.0±0.5
density
0.82±0.01g/ml
Alcohol compound
1.2%
alcohol
94.1%
[product performance]
It can be applied at room temperature and can be effective in a few minutes.
Super hydrophobic and self-cleaning function, the water drops on the surface of the coating and falls on the lotus leaf and slides off quickly.
Smooth coating surface dust and stains are difficult to adhere, and the coating surface is extremely easy to clean.
Temperature adaptability 200 ° C no abnormalities.
Cold resistance -50 ° C no abnormalities.
Barrier-resistant 5% NaCl solution immersed for 48 hours without abnormality
No abnormality in acid-resistant 5% H2SO4 solution for 48h
Alkaline 1% NaOH solution for 48h without abnormality
Gasoline resistance 120# solvent gasoline soaked for 48h without abnormality
Hydrophobic water contact angle ≥120°
There is no change in the appearance of artificial aging resistance for 500h.
Spectral sterilization. More than 650 bactericidal rates against Escherichia coli, Staphylococcus aureus, Candida albicans, etc. reached 99.9%
[function principle]
Self-cleaning principle:
The nano material used in the coating has a very low surface tension, thereby having a strong hydrophobic and oil resistant ability;
The contact area between dirt and other contaminants on the surface of the coating is greatly reduced, so that it has an incomparable superior automatic cleaning property, and water is on the surface of the object as if
Rolling down on the lotus leaves without leaving water marks can effectively extend the cleaning time.
Antibacterial principle: (1) causes the molecular structure of bacteria DAN to deform and inactivate the pathogen. Combined with cell membrane and cell wall DAN, it replaces the hydrogen bond between thymidine and sputum, cytosine and guanine in the double helix structure of DAN molecule, which leads to the structural deformation of bacterial DAN, inhibits the synthesis of DAN, RNA and protein, and causes the loss of pathogens. live. (2) Unique chemical structure, thorough sterilization. The chemical structure of silver determines the high catalytic ability of silver. The high oxidation state of silver has a high reduction potential, which is enough to generate atomic oxygen in the surrounding space. The atomic oxygen has strong oxidizing properties and can be sterilized. Binding to the thiol group (-SH) binds the thiol group (-SH) on the protease, deactivating the protease and causing bacterial death. When the bacteria are killed, the silver ions are released from the bacteria, and then contact with other flora, and the above process is repeated. This is also the role of silver killing and persistence. (3) Promote tissue repair and regeneration. Promote tissue repair and regeneration. In slow-strain injury, the activity of metalloproteinase (MMP) in wounds is enhanced. The MMP structure contains sulfhydryl (-SH), and the activity requires the participation of zinc ions. Excessive MMP activity destroys growth factors and new tissue and impedes healing. Silver can be combined with sulfhydryl groups in the MMP structure, or by reducing zinc ions on the wound surface, thereby reducing transitional MMP activity and promoting tissue repair and regeneration.
[Scope of application]
Widely used in hospitals, schools, subways, buses and other public places.
Widely used in a variety of kitchen cabinets, bathroom ware, bath wall surface and other environments.
It is widely used in the ceiling of the car cab and the surface of the floor and floor mats to achieve long-lasting sterilization and deodorization.
It is widely used in various marble, tile, glass and other coated surfaces to achieve antibacterial self-cleaning.
Widely used in toilets, sinks, sanitary ware, furniture, flooring, curtains, carpets, wall paper, children's toys, mobile phones, computers, refrigerators,
Surfaces such as air conditioners can be kept clean and sterilized for a long time.
【Instructions】
Spraying, scraping, coating
Step 1: Base surface treatment: Wash the surface of the glass with water or detergent. After the surface to be coated is treated, wipe it again with an alcohol cloth to ensure that no water remains on the glass surface, no water stains, no visible matter.
Step 2: Mix the two liquids, extract a certain amount of liquid from the large bottle package with a syringe, inject into the vial, mix and pour into the large bottle, and repeat several times until the liquid in the vial is fully poured into the large bottle.
Step 3: Apply paint: use a brush, sponge, cotton cloth and other tools to fill the paint and evenly apply it to the glass surface. Note that the paint should not be applied too much, there should be no sag, and the coating should be uniform.
Step 4: Polish the surface of the coating: - After the surface of the coating is dry (depending on the ambient temperature and the degree of air drying, usually about 2 minutes), there will be foggy marks on the surface of the coated glass, and the mist will be traced with a dry soft cloth. Wipe off quickly.
Construction Notes
It is not suitable for construction in rainy weather and high humidity.
[Package Specifications]
1/2/20L
Contact Us
- ShangHai Huzheng Nano Technology co,.LTD
- Contact nameClement Wang
- Phone86-21-50428367-815
Glass insulating coating | Anti-fog coating | Hydrophobic self-cleaning coating | Conductive coating |
Antistatic coating | Functional masterbatch | Textile functional finishing agent | Functional powder |
- High Quality Direct Factory Aluminum Paste for automotive painting
- Good Power of Hiding Temperature Resistance Whole sale Pigment for Car Paint
- Direct Factory Powder Form Solvent Mixing Colored Aluminum for ink coating
- Hot Sale Factory Direct Aluminium Paste For Automotive Refinish Paints
- High Lustre Scintillant Pearlescent Pigment for Body Painting
- Non-toxic Good Power of Hiding Pearlescent Pigment for Body Brushwork
- Hot Sale Factory Direct Aluminium Paste For Car Painting
- Superior Quality Water Color Powder Pearlescent Pigment for Eye Shadow
- brilliant bright Smooth Surface Aluminum Pigment for Corrosion Prevention,automotive painting
- High Lustre Scintillant Pearlescent Pigment for Body Painting
- High brightness aluminium paste
- HI-THERM BB-346-A Black impregnating varnish
- rheological additive
- Damisol® 3042 /700 Continuous impregnating process of all kinds of windings, especially rotor and stator coils of machines
- SYNTHITE AC-46 CLEAR AIR DRYING VARNISH
- Damival U602 (40) White / H901 Blue (13682 AW40 / 13481 BB00)Two parts polyurethane resin
- Epoxy floor material
- HI-THERM BB-346/A Black Baking Varnish
- China supplier 95% 98% 99% Pentaerythritol for resin
- NPEL127 bisphenol A liquid epoxy resin low viscosity resin
- Bisphenol A type 128 epoxy resin high transparent low viscosity colorless odorless resin
- South Asia bisphenol A epoxy resin NPEL128 low viscosity liquid anti-corrosion resin
- South Asia low molecular weight bisphenol A type 128 epoxy resin liquid resin
- South Asia general purpose epoxy resin NPES909
Popular Searches
Find Similar Products By Category
- Chemicals > Coating&Paint
- Buy on GoldSupplier.com
- How to Buy
- Browse by Catagories
- Browse by Hot Regoins
- Private Sourcing Events
- Sell on GoldSupplier.com
- How to Sell
- Post Products
- Manage Products
- Manage Groups
- About
- About Us
- Link to Us
- Contact Us
- Sitemap
- Please Enter your Email Address
- Please enter the content for your inquiry.
We will find the most reliable suppliers for you according to your description.
Send Now-
Clement Wang
Welcome to my shop! Glad to serve you!Please send your question!
Your message has exceeded the limit.
Your message has exceeded the limit.
-
-
Your inquiry content must be between 20 to 5000 characters.Send Now.
-
Please input the mailbox.
-