Surface treatment equipment，Automatic loading and unloading shot blasting machine

Automatic shotblasting cleaning machine is a new type of automatic shotblasting cleaning equipment designed and manufactured by us in combination with Germany, Denmark and Taiwan technology. The whole shot blasting process of this series of automation equipment is fully automated. It is suitable for cleaning and strengthening aluminum alloy die castings, castings and forgings, small round springs, bearings and other workpieces.

Through shot blasting cleaning and strengthening, not only can the rust on the surface of the workpiece, oxide scale, molded sand after casting and so on be removed, but also can reduce the internal stress of the workpiece and improve the fatigue strength of the workpiece.

This machine has the following characteristics:

1. It can finish automatic feeding of workpiece, automatic switch door, automatic circulation, automatic turnover, automatic shot blasting cleaning and automatic unloading.

2. the use of the popular pit free form saves the construction cost of the pit foundation.

3. The layout of the blasting chamber and the blasting device is determined by the computer three-dimensional dynamic ejection simulation, so that the projectile flow coverage area accurately covers the surface of the workpiece, the projectile from all directions of the workpiece at the same time to the surface of the workpiece.

4. The FS5.2 shot blasting machine manufactured by the world's leading technology can remarkably improve the cleaning efficiency and obtain satisfactory cleaning effect. The bearings are all imported from Germany. The utilization ratio of the projectiles is improved and the grinding life is increased.

There are four-pole motor, pulley, belt and belt tightening mechanism in the shot blasting machine of crawler type. The transmission belt adopts conventional triangle belt. The blade of the shot blasting machine is easy to maintain and replace. The speed of shot blasting fixed on the impeller of the shot blasting machine by the shoulder of the blade can reach 83 m/min and the speed of the impeller can reach 3000 rpm/min. The speed of the clock is higher than that of the ordinary straight blade.

The advantages of sandblasting machine are:

1. the metal parts of the sandblaster are basically free from damage and the dimensional accuracy will not change.

2. the surface of the parts is not contaminated, and the abrasive will not react with the parts.

3. Sandblasting machine can easily handle grooves, grooves and other difficult to contact parts, a variety of granularity of abrasive can choose to use;

4. The cost of treatment is greatly reduced, mainly reflected in the improvement of the efficiency of the sandblasting machine, which can meet various surface finishing requirements.

5. low energy consumption and low cost.

6. sandblasting machine does not pollute the environment, and saves the cost of environmental treatment.

email：1602005722@qq.com