Q195 cathode steel rod for Electrolytic aluminium factory using

Q195 cathode steel rod for Electrolytic aluminium factory using

The flat steel thickness and its allowable deviation shall comply with the requirements of Table 1.

  Table 1 Thickness tolerance     mm

The width of the flat steel and its allowable deviation shall comply with the provisions of Table 2.

      Table 2 width tolerance      mm

Flat steel length and its allowable deviation

The cathode flat steel is delivered according to a fixed length, the length of the fixed length shall be specified in the contract, and its allowable length deviation is 0 to +15 mm.

The bending of the length of the cathode flat bar shall comply with the requirements of Table 3.

 Table 3   Curvature   mm

Cathode flat steel is delivered according to actual weight. After negotiations between supply and demand sides, they can also be delivered according to theoretical weight. Flat steel measurements are calculated according to nominal dimensions and the specific gravity is calculated at 7.85t/m3.

Mechanical properties

The mechanical properties do not serve as delivery conditions for the cathode flat steel.