Contact Platform Support
Help CenterFUJI NXT Feeder Calibration JIG , Stainless Steel Pick And Place Feeder
Related Products
-
AF081E 8X4mm JUKI FEEDER EMBOSSED For SMD 0603 and 0805 ComponentUS$ 1 - 2MOQ: 1 Piece -
JUKI AF32FR-OP Deep Pocket Feeder for SMT Pick and Place Equipment KE2000 SeriesUS$ 1 - 2MOQ: 1 Piece
-
Original Used Feeder AF08HF 8X4mm for JUKI Smt Pcb Assembly EquipmentUS$ 1 - 2MOQ: 1 Piece
-
Stainless Steel JUKI Equipment SMT Feeder AF24FS Original With Good ConditionUS$ 1 - 2MOQ: 1 Piece
-
Mechanical Smt Feeder AF16FS for JUKI Surface Mount Technology EquipmentUS$ 1 - 2MOQ: 1 Piece
FUJI NXT Feeder Calibration JIG for SMT pick and Place Equipment
It is essential for this equipment that enhanced productivity , installation and quality improvement
As the high efficiency vision camera is asked in order to investigate precisely and repair the error of device position which results from the modification and wear of tape feeder in the SMD device.
The Feeder, which supplies resources in the SMT production line, should be under clear condition continuously because it has relatively close correclation with the quality of a current line, production efficiency and loss
Convenience in use---------
1.The acquisition for the rectangular coordinate of X-Y direction.
2.Check for the existence, transformation, user in the feeder
3.The installation is to euip it with actual device and consolidation in feeder base
4.Lens` safe arrival part, CCD Camera, the precise micro controller of X, Y, Z axis
5.The automatic (or semi-automatic), IC transfer device can move IC to the specific area(point)
6.The simple calibration for removing or taking feeder easily
7.It is correction as measurement with CCD Camera.
8.Timer control make it pssible to change the IC pick-u time.
9.The use pressure is able to control in the regulator and air cylinder.
10.Verification and correction available worker`s convenience and well carriage by the work desk.
Send Inquiry to This Supplier
You May Also Like
-
JUKI SMT Feeder AF12FS for Surface Mount Technology EquipmentUS$ 1 - 2MOQ: 1 Piece
-
Stainless Steel JUKI AF SMT Feeder AF05HP 8*2mm for 0402 Paper ComponentUS$ 1 - 2MOQ: 1 Piece
-
Original JUKI Feeder Calibration Jigs E9001705J0B For KE2000 Series Mechanical FeedersUS$ 1 - 2MOQ: 1 Piece
-
AF081E 8X4mm JUKI FEEDER EMBOSSED For SMD 0603 and 0805 ComponentUS$ 1 - 2MOQ: 1 Piece
-
JUKI AF32FR-OP Deep Pocket Feeder for SMT Pick and Place Equipment KE2000 SeriesUS$ 1 - 2MOQ: 0 Piece
-
Original Used Feeder AF08HF 8X4mm for JUKI Smt Pcb Assembly EquipmentUS$ 1 - 2MOQ: 1 Piece
-
Stainless Steel JUKI Equipment SMT Feeder AF24FS Original With Good ConditionUS$ 1 - 2MOQ: 1 Piece
-
Mechanical Smt Feeder AF16FS for JUKI Surface Mount Technology EquipmentUS$ 1 - 2MOQ: 1 Piece
-
JUKI SMT Feeder AF12FS for Surface Mount Technology EquipmentUS$ 1 - 2MOQ: 1 Piece
-
Stainless Steel SMT Feeder AQ02HP For SMD 0201 Component For JUKI Smt MachineUS$ 1 - 2MOQ: 1 Piece
