Contact Platform Support
Help CenterEn 136 Gbt 16556c Full Face Masks Fire Resistance Tester Flam Performance Tester
Related Products
-
Combustibility Tester of Building Material ISO 1182 Flame Performance TesterUS$ 1 - 2MOQ: 1 Set -
Needle Flame Burners IEC 60695 Flame Performance TesterUS$ 1 - 2MOQ: 1 Set
-
Polyfoam Burning Testing Instrument UL94 Flame Performance TesterUS$ 1 - 2MOQ: 1 Set
-
Cable Flame Analyzer Bunched Cable Burning Spread Tester Flame Performance TesterUS$ 1 - 2MOQ: 1 Set
-
ISO 1210 UL94 Horizontal /Vertical Burning Chamber Flame Performance TesterUS$ 1 - 2MOQ: 1 Set
Introduction:
Full Face Masks Flame Resistance Tester is mainly composed of jacket and bib composition, may also wear fire protective helmets, fire protective boots and fire-protective gloves!
Each set must be fitted a serial number of check marks with strong national fire equipment quality inspection center is to be manufactured.
TESTECH Full Face Masks Flame Resistance Tester is designed and producted according to GA 124-2013 and GB/T16556-2007 latest version of the standard development; meet the standard tool for back, back with a belt buckle, bottle protective cover and full face shield barrier combustion performance test; the instrument is intelligent, touch-screen control system; the freedom to choose different samples of test procedures; and test results are automatically saved.
International standards:
• EN 136: Respiratory protective devices - Full face masks - Requirements, testing, marking
• GA 124-2013 latest version of the standard requirements
Test section:
• Burning test private metal mould
1, Six imported burner nozzle, you can control propane and air flow rate,
2, Burner nozzle height can be adjusted up and down; 250mm from the outer surface of the specimen,
3, Pressure gauge and regulator valve regulates the burner gas pressure in the range of 0 ~ 10kPa,
4, Gas automatic blocking device, which blocked gas supplies when the test is 5seconds,
6, Automatic ignition, switches off automatically after 5s ignition;
• Back with strap test section:
1, Stainless steel baffle plate, appearance and corrosion;
2, Imported Bunsen burner, gas and air flow rate can be adjusted;
3, Torch lifting device; stainless steel sample holder;
4, Automatic timing;
5, Flame height is 40mm; the temperature at 20mm is 800 ± 50 ºC;
6, utAomatic ignition, turns off automatically after 20s ignition;
Specifiction:
| Size | 1,400 (W) * 650 (D) * 1,300 (H) mm |
| Power | AC 220V, 50 / 60Hz, 15A; |
| Weight | 80KG |
| Model | GD16556 |
| Flame height | 40mm/20mm |
Send Inquiry to This Supplier
You May Also Like
-
Spread Flame Apparatus Radiant Panel Flame Spread Tester ISO 5658 Flame Performance TesterUS$ 1 - 2MOQ: 1 Set
-
IEC 60695 Fire Testing Instrument Glow Wire Tester Flame Performance TesterUS$ 1 - 2MOQ: 1 Set
-
Building Material Non-Combustibility Tester ISO1182 BS476-4 Flame Performance TesterUS$ 1 - 2MOQ: 1 Set
-
ISO 6941 Fabrics Vertical Flammability Testing Instrument Flame Performance TesterUS$ 1 - 2MOQ: 1 Set
-
Cable Corrosion Analysis Apparatus / Hydracid Test for Cable Flame Performance TesterUS$ 1 - 2MOQ: 1 Set
-
Needle Flame Chamber IEC 60695 Flame Performance TesterUS$ 1 - 2MOQ: 1 Set
-
Polyfoam and Plastic Burning Testing Instrument UL94 Flame Performance TesterUS$ 1 - 2MOQ: 1 Set
-
Bunched Cable Burning Spread Tester UL 1685 IEC 60332 Flame Performance TesterUS$ 1 - 2MOQ: 1 Set
-
High Quality Cone Calorimeter for Building Material ISO5660 Flame Performance TesterUS$ 1 - 2MOQ: 1 Set
-
Bunched Cable Burning Spread Tester UL 1685 IEC 60332 Flame Performance TesterUS$ 1 - 2MOQ: 1 Set
