4 Channel RS232 Serial to Ethernet Converter Console Server
Introduction
Function Features
- 1. 4KV/2KA enhanced surge protection for serial ports
- 2. Built-in 15 KV ESD protection for all serial signals
- 3. Web-based configuration
- 4. Support TCP server/ TCP client/UDP/Virtual COM Socket modes
- 5. It has a compact structure, adopting high-performance processor and high-capacity memory;
- 6. Device Manager software for centralized management and control;
- 7. WEB browser for remote setup of the equipment;
- 8. It can support 8channel RS232 or RS485 or RS422
- 9. Ethernet supports 10M/100M, full-duplex / half-duplex and adaptive modes;
Ethernet Interface
10/100Mbps rate
full/duplex auto-negotiation
Protocol: Support IEEE 802.3
RJ45 connector
Magnetic Isolation Protection: 1.5 KV built-in
Serial interface
Software and hardware flow control
Terminal Block (3 pins per port)
TX and RX activity indicators
Serial Line Protection:
15 KV ESD protection for all signals(Pending)
Pull High/Low Resistor for RS-485: 10 K Ω,Serial Communication Parameters
Data Bits: 5, 6, 7, 8
Stop Bits: 1, 2
Parity: None, Even, Odd, Space, Mark
Baudrate: 300 bps to 115.2 Kbps
Serial Signals
RS-232: TxD, RxD,GND
RS-422: Tx+, Tx-, Rx+, Rx-, GND
RS-485-2w: Data+, Data-, GND
Software
Network Protocols: ICMP, IP, TCP, UDP, HTTP, ARP,
Configuration Options: Built-in WEB server,
Windows Virtual COM Drivers: Windows 2000/XP/2003/Vista/2008/7
Power supply
working voltage range wide, good anti-disturb and Isolation, work stable
Input Voltage: 5 VDC, 24VDC, -48VDC, 110VAC and 220VAC
Power Consumption:
environment condition
Operating temperature: 0C~+50 C
Storage temperature: -40 C~+85 C
Relative temperature:95% (uncondensed)
Application:
Connect serial devices to server based applications over an IP network
Manage remote serial console ports over an IP network
Virtual modem capability for modem-based applications
Ordering information
| BD-4RS232-ETH | Serial to Ethernet/IP converter, 4channel RS232 to Ethernet/IP, power AC220V |
| BD-4RS485-ETH | Serial to Ethernet/IP converter, 4channel serial RS485 to Ethernet/IP, power AC220V |
| BD-4RS422-ETH | Serial to Ethernet/IP converter, 4channel RS422 to Ethernet/IP, power AC220V |
Send Inquiry to This Supplier
You May Also Like
-
USB to RS485 RS422 Interface ConverterUS$ 4 - 8MOQ: 1 Unit
-
RS485 Serial to Ethernet Converter Console ServerUS$ 32 - 42MOQ: 1 Unit
-
RS232 Serial to Ethernet Converter Console ServerUS$ 32 - 42MOQ: 1 Unit
-
RS422 Serial to Ethernet Converter Console ServerUS$ 32 - 42MOQ: 1 Unit
-
2 Channel RS422 Serial to Ethernet Converter Console ServerUS$ 39 - 59MOQ: 1 Unit
-
2 Channel RS485 Serial to Ethernet Converter Console ServerUS$ 39 - 59MOQ: 1 Unit
-
2 Channel RS232 Serial to Ethernet Converter Console ServerUS$ 39 - 59MOQ: 1 Unit
-
16 Channel RS485 Serial to Ethernet Converter Console ServerUS$ 330 - 380MOQ: 1 Unit
-
16 Channel RS232 Serial to Ethernet Converter Console ServerUS$ 330 - 380MOQ: 1 Unit
-
32 Channel RS232 Serial to Ethernet Converter Console ServerUS$ 490 - 590MOQ: 1 Unit
