utersspecializes in air filter elementand line filter service

Henan Uters International CO.,LTD (referred to as UTERS)is a manufacturer and distributor of Hydraulic Filters ranking list,which mainly produces precision filter,precision filterand precision filter .it provides high-quality Filter equipment and accessoriesbrand and qualityair filter elementx1dd01ebn services to Xiangxi Tujia and Miao Autonomous PrefectureandChangsha Citycustomers,with a complete and scientific quality management system.

UTERS
Attention to the precision filter

Maintenance and maintenance, 1, the core component of the precision filter is filter core, filter core is easily damaged parts, need special protection. 2, precision filter for a long time work, will cut a certain amount of impurities, this will reduce the rate of work, so often clean, at the same time cleaning filter core.
3, in the cleaning process, we should pay special attention to the cleaning of the filter core, do not deform or damage, otherwise, it will lead to the reduction of filtering precision, and can not reach the production requirements.
4, if the filter core is found to be deformed or damaged, it must be replaced immediately.
5. Some precision filter cores can not be repeatedly used, such as bag filter core, polypropylene filter core and so on.
Application scope: precision filter is widely applied in petrochemical, natural gas, paint, paint, ink, medicine, bioengineering, automobile manufacturing, electronics, electroplating, food, beverage and other fields. It is an ideal equipment for all kinds of liquid filtration, clarification and purification.
Petrochemical, chemical industry: hydrogen peroxide, resin, lubricating oil, polymer, viscose, aviation coal and various kinds of oil, catalyst, chemical fiber manufacturing process, various liquid purification, chemical intermediate products and chemical products separation and recovery. Oil and natural gas industry: CNG filtration, gas desulfurization and dehydrating agent filtration, separation and purification of natural gas and refinery, oil field water injection, well repair and acidizing liquid filtration.
Paint, paint, ink industry: latex paint, paint raw materials and solvent filtration, printing ink, printing ink and additives; Pharmaceutical and bioengineering industries: infusion (LVP and SVP) pharmaceutical water, biological products, plasma, various pharmaceutical intermediates, pharmaceutical raw materials, solvent filtration, CIP filtration, fermentation tank intake and tail gas sterilization. Automotive Industry: electrophoretic paint, topcoat, ultrafiltration water, pretreatment fluid, vehicle spray water, engine crankshaft cooling liquid, paint spraying industrial gas and paint house gas purification. Electronics and electroplating industry: all kinds of chemicals and processes for liquid crystal display, lithography, CD, copper foil, IC and other microelectronics and electronic products manufacturing process, gas filtration for process, electroplating, process gas purification and purification.
Food, beverage and wine industry: process purification and aseptic processing of wine, yellow wine, liquor, beer, fruit wine, sake, juice, tea beverage, soymilk, dairy products, bottled water, edible oil, vinegar, monosodium glutamate and other food additives.
Attention, 1, filter to "rough after the first" principle combination configuration, the order can not be reversed.
2, the actual compressed air flow, pressure and temperature through the filter can not exceed the specified value of the nameplate.
3, it is necessary to pay attention to the separation of the inlet and outlet position of the filter.
4, the installation of the filter is perpendicular to the ground. There is a certain height from the ground to facilitate the change of the filter core. 5. When one of the following cases occurs, the filter core should be replaced.
The effect of a and filter was obviously deteriorated.
The value of B and pressure difference is more than 0.07MPa; (Note: the initial pressure ｄｒｏｐ of the filter core is<0.015Mpa);
C, use time limit: FC, FT, FA are 8000h, FH is 2000h;
6, without the filter of automatic drainage, the ball valve should be opened regularly to remove the water from the filter shell. Usually no less than 1-2 times per class.
7, the inlet temperature of the filter is not more than 66.
is focused on Hydraulic Filters ranking list, pall filtersystems gmbh, Regular air filter element, Spin On Filter ranking list and other projects. even though in the rapid development of the project ,UTERS always stressed the balance between external opportunities and internal management, attaches great importance to the core competitiveness of enterprises to cultivate and shape. Our company take the value of customer service as the core competitiveness of enterprises, adhering to the honesty and integrity , the pursuit of excellence, respect individual for the corporate spirit, and strive to provide customers with integrity and reliable precision filter.

Adhering to the "dedication, hardworking and thrifty, struggle, innovation" spirit of enterprise, UTERSbases on long-term development, technology as the core, market-oriented, and constantly open up new areas, undertaking to provide fast, high-quality ser