WS2812 IC LED Strip 5050 RGB 30/60/144 pixels dream color smart LED pixel strip WS2812B Black/White PCB,IP30/IP65/IP67

Package include:

1PCS LED Strip (not include adapter and controller)

If you need adapter and controller ,please click here : DC5V power supply , Mini WS2812 Controller  ,Music controller

if the order no more than $5 ,will send by not registered mail.

Features:

Input voltage:DC5V

Power:30leds/m----9w/m

           60leds/m----18w/m

           144leds/m----43.2w/m (±5%)

LED:each LED is separately controlled

IC Type: improved version ws2812 IC(built inside the 5050 smd rgb led) 

of IC: (1 IC drives 1 led chip); 

Grey scale: 256;

Bits/color:8-bits/color;

FPC color: BLACK/White

Protection rate：  IP30 Non-Waterproof

                             IP65 Waterproof in Silicon Coating

                             IP67 Waterproof in Silicone Tube 

Colors:Full color RGB, dream color changing; 

Cuttable:every LED is cuttable; 

Package:in anti-static bag,IP30 IP65 with 3M adhensive tape on the back

                (IP67 without 3M adhensive)

               each strip with one free male connector for connector

A strip of LED’s will pull way too much power for your Arduino to handle, so always consider an additional 5V power supply.

Rule of thumb is : each RGB LED unit pulls about 60 mA (3x 20 mA, for Red, Green and Blue).

Your power supply can have overcapacity when it comes to Amps, so if your project needs 3.6 A, and you only have a 10 A power supply, then this will work great.