510769313 Azpgg-11-045/038ldc2020mb Metallurgy Cast / Steel Azpgg Rexroth Pump

Description:

In fact, there is a small amount of fluid loss in the pump, the pump can not achieve 100% operating efficiency, because these fluids are used to lubricate the bearings and gears on both sides of the pump body that is not possible with no gap, it is not 100% of the fluid discharged from the export, so a small amount of fluid loss is inevitable. However, the pump can still run well and can still reach 93% to 98% efficiency for most of the extruded materials. This pump will not be affected too much for a fluid with varying viscosity or density in the process. If there is a damper, such as a filter or a limiter on the side of the outlet, the pump will push the fluid through them. If the damper changes in operation and the filter is dirty or blocked or the back pressure of the limiter is increased, the pump will maintain a constant flow until the mechanical limit of the weakest part in the device is reached (usually equipped with a torque limiter). The external gear pump to 28 specifications of NG1 Series B and f sliding bearings for high load drive shaft in accordance with ISO or SAE and customer specific standard design can achieve a combination of oil pump mouth: interface flange or thread threaded interface pump with allowable pressure drop.

Contact Us:

We are an independent hydraulic company that stocks new genuine Bosch Rexroth Pump & motors. We stock Atos, Yuken, Uchida and Nachi Piston Pump. To ensure the highest-quality hydraulic pump and motor repair or remanufactured unit, We stay up-to-date with the latest diagnostic and assembly and test equipment. 

If you have any problems please contact us by emailing a675991295@163.com