QT-SC02 Frequency vibration solar insecticidal lamp
- 1000 Set / Sets per Month
- Beijing
- T/T L/C
- Sand Water Filter/Water treatment plants
- Automatic Doypack Seal Machine (insert and sealing machine)
- Liquid level transmitter
- IPX3/IPX4 Hand-held Water Spray Nozzle Test Device IEC 60529
- IPX5,IPX6 Jet Nozzle of IEC 60529, Brass material
- Adjustable and multifunctional Spring Impact Hammer IK01-IK07 Level Tester
Product Details
Brand Name: | QT-SC02 | Place of Origin: | China | Model Number: | QT-SC02 |
Product Description
/en/Item/Show.asp?m=1&d=1248
Product description: QT-SC02 Frequency vibration solar insecticidal lamp can be widely used in agriculture, forestry, vegetable, tobacco, warehousing, liquor brewing, gardens, orchards, urban greening, aquaculture, etc., especially in fields attacked by cotton bollworm. This lamp can trap and kill the farm pests, forest pests, fruit pests and vegetable pests, mainly including cotton bollworm, scarab, cutworms, corn borer, fruit noctuid, beet armyworm, Prodenia litura, fall webworm, longhorn beetle, up to 87 families and 1287 species of insect pests.
Technical parameters:
Insecticidal lamp
1. Frequency vibration technology
2. The impact area: ≥0.15m2
3. Light trap: frequency vibration tubes (320 ~ 680 nm), single tube
4. Dust-proof and waterproof no less than IP66 grade
5. Service life more than 50000 hrs., operating temperature - 30℃ ~ 50℃
6. The electrified wire is coated with electric arc resistance materials, the wire diameter is 0.6 mm. The wire can instantaneously release voltage as high as 2000 -3000 V when touched by insect pests. The wire is made of stainless steel mesh. The horizontal part of the wire is winded spirally in case of short circuit caused by insect boy residuals. Wire space can be adjusted according to different target pests (usually no more than 10 mm)
7. Insulation column can stand instant high temperature of 1000 degree Celsius, corrosion resistance, high voltage resistance. In raining day, after 30 minutes of continuous high voltage arc, insulation column is still intact without carbonization;
the controller
1、time setting combined with light control function 24V/12V automatic identification, power consumption <10 mA (no load), no stroboflash;
2、light source power can be controlled by limiting current, and it has many merits, such as reverse access protection, reverse charging protection, overcharge and over discharge protection, short circuit protection, lightening protection and temperature compensation protection functions. Dustproof and waterproof level is no less than IP66 grade;
3、12 V/24V 10A controller with automatic identification function, optical + control + period of time the control;
Solar battery components
1. 40 W solar battery components
2. Insulation ≥100 Ω
3. Wind resistance 60 m/s
Solar battery
1、12 V 24 AH solar battery
2. Total capacity ≥ 24 AH
3. Operating temperature - 30℃~ 55℃
The light pole
1. Height ≥ 2.8 meters
2. The diameter of threaded hole in the pole is no more than 5 cm, stiffener at the joint of flange and light pole
the overall
1. Temperature range -40℃~ 55℃
2. Control area: 3.3 ~ 4 ha
3. Lamp startup time: ≤5s
ORIGIN: CHINA
Channel Technology Group Limited
Tel:+86-10-62111044
Fax:+86-10-62114847
Web:/en/
Email:repair@qudao.com.cn
Contact Us
- Beijing Channel Science Equipment Co., Ltd.
- Contact namekui
- Phone86-010-62111044
Animal | Agriculture | plant | soil |
environment | Hydrology | Sampler |
- Test probe 43 IEC 61032-Probe 43-Figure 17 Jusdtest
- IEC61032-Probe 41-Figure 16 Test probe 41
- IEC61032-Probe 32-Figure 15 Test probe 32
- Test probe 31 IEC61032-Probe 31-Figure 14
- Jointed Child Finger Probes IEC 61032-Probe 19-Figure 13 R 2.5±0.05 mm
- Test probe 18 of IEC 61032 R4.3mm Jointed Child Finger Probes
- Digital recorder for Lugeon testing
- MRU Subsea maring motion reference unit
- MRU maring motion reference unit
- eMRU motion reference unit
- IEC61032-Probe 14-Figure 10 Test probe 14
- Short Test Pin Probe IEC61032-Test Probe 13-Figure 9
- Long Test Pin Probe IEC61032-Probe 12-Figure 8 JSD-08
- IEC61032-Test Probe 11-Figure 7 Φ12mm IEC 60601
- IEC 61032:1997-test Probe 2-Figure 6 with handle
- IEC61032-Probe D-Figure 4 Test probe D 1mm diameter
- Test probe C IEC61032-Probe C-Figure 3 MODEL JSD-03
- IEC61032-Probe B-Figure 2 Test probe B IP2X test
- Test probe A IEC 61032-Probe A-Figure 1 JUSDATEST
- Test finger ISO 20957-1:2013 Figure 1
- JSD-K02 Test probe ABCD-Power supply Kit of IEC 61032:1997
- PRS10 Rubidium Oscillator
- HY-408 magnetic compass for naval
- The BX992 is a dual-antenna receiver enclosure with integrated inertial navigation system powered by the BD992-INS
Popular Searches
Find Similar Products By Category
- Measurement & Analysis Instruments > Other Measuring & Analysing Instruments
- Buy on GoldSupplier.com
- How to Buy
- Browse by Catagories
- Browse by Hot Regoins
- Private Sourcing Events
- Sell on GoldSupplier.com
- How to Sell
- Post Products
- Manage Products
- Manage Groups
- About
- About Us
- Link to Us
- Contact Us
- Sitemap
- Please Enter your Email Address
- Please enter the content for your inquiry.
We will find the most reliable suppliers for you according to your description.
Send Now-
kui
Welcome to my shop! Glad to serve you!Please send your question!
Your message has exceeded the limit.
Your message has exceeded the limit.
-
-
Your inquiry content must be between 20 to 5000 characters.Send Now.
-
Please input the mailbox.
-