Mechanical Shock Tester

Mechanical Shock Tester



Mechanical Shock Testing/Features:

1.WINDOWXP based control system .

2.has a measurement range setting function , improve signal resolution .

3.automatic gain adjustment , FIR digital filter stepless .

4.with shock wave automatic parameter measurement function , can automatically display peak acceleration , pulse width and speed variation and other parameters. [sales(at)]

5.with a single acquisition and continuous acquisition.

6.has a history display, storage , maximum minimum statistical functions.

vides database management functions to achieve acquisition parameters are automatically saved and loaded ; measurement data preservation and reproduction .



Bump Test System/Parameters :

With a single acquisition and continuous acquisition function ;

Has a history display, storage , maximum minimum statistical functions ;

Provide database management features , automatic save and load acquisition parameters ; measurement data preservation and reproduction ;

Data collected to form the test report , word documents , user-friendly print and post- impact curve document production ;

Provide GJB150, GJB360A, GB2423, GJB548A, GJB1217, MIL-STD-810F standards such as tolerance band ;

Provides shock wave power spectrum, response spectrum analysis function ( option ) ;



Repetitive Shock Vibration/Performance indicators:

1.flexible positioning of the electric trolley , easy fixed position , speed trials to achieve the desired value ;

2.tackle the relatively low height , is conducive to the installation of the test ;

3.tackle countertops can be adjusted to the level of user-friendly installation specimen ;

4.can be used remotely operate fully to ensure the safety test personnel ;

5.When you install the client machine simply fixed on the ground , no other complex operations or install , easy to test



Daily Care and Maintenance :

1.always kept neat appearance .

ntrol cabinet clean-up once a month to prevent excessive dust , affecting the normal operation of the device .

3.After the test is completed , you should turn off the main power supply , water stains wipe clean work indoors , try to keep the chamber in a dry environment ;

4.electrical components on the control panel , such as the need to exchange malfunction , do not mess demolition to ensure the life of the chamber .

5.equipment has been used for a long , spare parts motor blower unit , wheel deceleration devices, if abnormal noises should be checked and cleaned regularly note refueling .

1.WINDOWXP based control system .

2.has a measurement range setting function , improve signal resolution .

3.automatic gain adjustment , FIR digital filter stepless .

equipment has been used for a long , spare parts motor blower unit , wheel deceleration devices, if abnormal noises should be checked and cleaned regularly note refueling .

provides database management functions to achieve acquisition parameters are automatically saved and loaded ; measurement data preservation and reproduction .