Contact Platform Support
Help CenterLarge Scale Flammability Testers Nfpa 701
Related Products
-
IEC 60695 ISO 1210 UL94 Horizontal /Vertical Flame ChamberUS$ 1 - 2MOQ: 1 Set -
Cable Flame Analyzer Bunched Cable Burning Spread TesterUS$ 1 - 2MOQ: 1 Set
-
Cable Burning Analysis Fire AnalyzerUS$ 1 - 2MOQ: 1 Set
-
Building Material Fire Resistance TesterUS$ 1 - 2MOQ: 1 Set
-
ISO 6941: 2003 Fabrics Vertical Burning InstrumentUS$ 1 - 2MOQ: 1 Set
Introduction:
NFPA 701: 2004 & 2009 are standards for fire-retardant fabric and film material combustion test, published by the National Fire Protection Association.The standards are widely used in the United States, for public curtains and other hanging fabrics, which not water resistant fabric.
Large Scale Flammability Testers is according to the US Fire Department NFPA 701 method developed.Suitable for single or multiple layers of fabric panel for gram more heavily than 700g / m2 (21od/yd2) fabrics, and polyethylene-coated fabric etc. |
International standards:
NFPA 701
ASTM D 5025
Specification:
1, Dimensions: length 500 X width 500 X height 2420mm ;
2, Burner size: diameter 9.5 mm + 1.5, -0 mm, length 100 ± 10 mm ;
3, Weight: 110kg
4, Flow meter range: 0 ~ 66cc/min
5, Stainless steel cabinet structure
6, With stainless steel wire
7, Imported Bunsen burner conforms to ASTM D 5025 standard
8, Imported Bunsen burner flame was 25 degree angle
9, You can set the test time
10, Automatic ignition and extinguished mode
11, Needle valve control the flame height
12, Timer range: 0-99s
13, Operating pressure of the burner: 17.5 kPa ± 2.0 kPa
14, Operating gas flow rate: 113 L/hr ± 3 L/hr
15, Flame height: 280±12 mm.
16, Open box structure
17, Calcium silicate board cabinet, stainless steel exterior package
18, Merkel Burner: Burner for heat 10,500 Btu/Hour
19, Gas release and burning time is set automatically 20 seconds
20, Automatic-ignition
21, Timer accuracy of 0.1 seconds
22, Standard sample clip
23, Power: 220V, 50Hz, 110W
Send Inquiry to This Supplier
You May Also Like
-
Textile Vertical Flame Spread Tester ISO 6941: 2003US$ 1 - 2MOQ: 1 Set
-
ISO 12127 Clothing for Protection Contact Heat Transmission TesterUS$ 1 - 2MOQ: 1 Set
-
Building Material Cone Calorimeter ISO 5660US$ 1 - 2MOQ: 1 Set
-
ASTM D 1230 Nfpa 702 45 Degree Test Determination of Flame Spread RateUS$ 1 - 2MOQ: 1 Set
-
IEC 60332 Single Cable Vertical Burning Testing Tester En50086US$ 1 - 2MOQ: 1 Set
-
Combustibility Tester of Building Material ISO 1182US$ 1 - 2MOQ: 1 Set
-
ISO 1182 Non-Combustibility Tester for Building MaterialUS$ 1 - 2MOQ: 1 Set
-
UL 1518/ISO 9772 VW-1 Vertical Cable Flame TesterUS$ 1 - 2MOQ: 1 Set
-
En 136 Gbt 16556c Full Face Masks Fire Resistance TesterUS$ 1 - 2MOQ: 1 Set
-
NF P 92 EU 95 Thermal Radiation Melt Drop TesterUS$ 1 - 2MOQ: 1 Set
