Contact Platform Support
Help CenterCable Flame Analyzer Bunched Cable Burning Spread Tester
Related Products
-
Cable Burning Analysis Fire AnalyzerUS$ 1 - 2MOQ: 1 Set -
Building Material Fire Resistance TesterUS$ 1 - 2MOQ: 1 Set
-
ISO 6941: 2003 Fabrics Vertical Burning InstrumentUS$ 1 - 2MOQ: 1 Set
-
Textile Vertical Flame Spread Tester ISO 6941: 2003US$ 1 - 2MOQ: 1 Set
-
ISO 12127 Clothing for Protection Contact Heat Transmission TesterUS$ 1 - 2MOQ: 1 Set
Introduction:
Bunched Cable Vertical Flame Spread Tester is used to bundle cable orfiber optic cable to detect vertically mounted under specified conditions forvertical flame spread inhibiting the ability of the instrument, the power cables,control cables, fiber optic cable bundle burning test Preparation means. Whengiven a certain amount of housing supply of gas and the use of standardignition source of ignition, this instrument can be used to test for verticalflame vertical flame vertical diffusion to electric cables and wires of state.In addition, if the tester burner adjustment of 20 degrees can be achieved byIEEE 383 (IEEE 1202) testing standards. Equipment can be equipped with heatrelease instrument configure the port, with the gas analyzer can measure thethermal power values such as HRR (heat release rate),SPR(smoke generationrate) and so on
International standards:
1. UL1685
2. IEC 60332-3-10
3. EN 50399
4. GB/T 18380.31
Features:
1, high intelligence, easy tooperate;
2, professional industrialdesign, beautiful, generous;
3, precision equipment, security,and stability;
4, microcomputer control system,intelligent testing process; no manual timing and related operations;
5, corrosion-resistant stainlesssteel housing;
Control system:
1.PLC withlarge-screen touch screen control system;
2, automaticignition system, automatic timing; Timing range 999min, accuracy 1s;
3, experimental datais automatically stored, free inquiry;
4, 40 minutes, 1hour timekeeping reminders;
5, the specimenmounts with electric crane lift.
Specifiction:
| Size | 1,000(w) × 2,000(D) × 4,000(H) |
| Console Size | 600 (W) × 750 (D) × 1,600 (H) mm |
| Power | AC 220V, 50 / 60hz, 15A |
| Weight | 1500KG |
| Utilities | Propane Gas Valve System, Ignition System |
Send Inquiry to This Supplier
You May Also Like
-
Building Material Cone Calorimeter ISO 5660US$ 1 - 2MOQ: 1 Set
-
ASTM D 1230 Nfpa 702 45 Degree Test Determination of Flame Spread RateUS$ 1 - 2MOQ: 1 Set
-
IEC 60332 Single Cable Vertical Burning Testing Tester En50086US$ 1 - 2MOQ: 1 Set
-
Combustibility Tester of Building Material ISO 1182US$ 1 - 2MOQ: 1 Set
-
ISO 1182 Non-Combustibility Tester for Building MaterialUS$ 1 - 2MOQ: 1 Set
-
UL 1518/ISO 9772 VW-1 Vertical Cable Flame TesterUS$ 1 - 2MOQ: 1 Set
-
En 136 Gbt 16556c Full Face Masks Fire Resistance TesterUS$ 1 - 2MOQ: 1 Set
-
NF P 92 EU 95 Thermal Radiation Melt Drop TesterUS$ 1 - 2MOQ: 1 Set
-
ISO 6942 Tpp Thermal Protection Performance TestingUS$ 1 - 2MOQ: 1 Set
-
IEC 60754 Gbt 17650 Cable Corrosion Test ApparatusUS$ 1 - 2MOQ: 1 Set
