The structure and working principle of portable cement silo

The portable cement silo is a cylindrical structure with four legs supporting the position of the entire body, and the entire position is tempered and welded in various forms, with filters and pressure relief valves on top. When the cement silo (cement tank) is working, it must be erected by a dedicated crane and then entered into the Precast concrete foundation to check the vertical and horizontal cement bin after erection (cement tank), and then the bottom base is firmly embedded in the weld.

In the late stage, the bulk cement truck is transported cement to the site of the silo conveying pipe and cement bin (cement tank) through the pneumatic pipe of the bulk cement truck to cement silo.

In the process of conveying to the cement storehouse, the operator must press the dust vibrating motor uninterrupted button, shake off the dust collecting bag attached to the cement, prevent clogging the bag, cause the storehouse to explode.

Once the bag is sealed, the pressure in the warehouse top is over the pressure release valve, releasing pressure in the pressure release valve to prevent the explosion of the warehouse.

The location of the material can be observed through adequate storage and lack of material. When the discharge is needed, the manual discharging valve at the bottom of the cone is opened and the cement is transported through the cement conveying device. In the discharge process, if there is a "bagging" phenomenon, press the timely broken arch device solenoid valve button, blowing gas, exempt "bagging" catheter into the material to ensure smooth supply of cement. When the cement conveying device fails, the manual drain valve at the bottom of the cone is closed to prevent the cement from overflowing and causing waste.

If you are interested in our machine and some demands, you can contact with me please:

Website:  

/

/

E-mail:

jianxinmachinery@gmail.com

mixer_laurence@foxmail.com

Phone: +86-371-86599393