Home > Products > Steam Trap > inverted bucket steam trap
inverted bucket steam trap
- 0 Unit / Units per Month
- shanghai
- T/T L/C D/P D/A Credit Card PayPal Other Cash Escrow
Product Details
Brand Name: | GOOLE | Place of Origin: | China | Model Number: | 880 |
Material: | Casting | Application: | General | Standard or Nonstandard: | Standard |
Pressure: | Medium Pressure | Port Size: | 15-80 mm | Media: | Other, steam |
Temperature of Media: | Medium Temperature |
Product Description
Brief Introduction.
Inverted bucket type steam trap,as a mechanical steam trap, has outstanding performance and can be used low ,medium and high pressure.
Working Principle
The design makes use of the working principle of difference in density of steam and condensate. The compound lever is connected to the inverted bucket inside the valve,working on steam pressure switch.The inverted bucket is a level sensor in the steam trap with opening downward.When the device starts up ,air and low-temperature condensate enter into the tube.At this time ,the trap is completely open,allowing quick discharge of air and low-temperature condensate and temperature rising. Steam entering into the inverted bucket causes it to float.and the lever arm drives the valve corce to close. A small vent in the bucket may automatically discharge the air.Some part of the steam will be discharged from the vent ,and other part of the steam will become condensate.The inverted bucket will sink without buoyant force, and then the lever arm will help the valve core to open the valve. When the valve is open, steam will get into the bucket again,causing the valve to close again. The device will work circularly and discharge water discontinuously.
Structural Characteristic
Inverted bucket type steam trap,as amechanical steam trap, has outstanding performance and can be used low ,medium and high pressure.It applies stainless steel internal components and heat treatable steel base . It has such features as strong structure,resistance to abrasion and corrosion, long durability, and not easy to be damaged. It is highly recommended to be used for condensate recovery sustem for its steam saving capability, High heat engine efficiency, and anti-back pressure characteristic. The trap may be assembled with check valve so as to save piping space.
Field of Application.
Product Name:88X Inverted Bucket Steam Trap.
Pressure Rating: 1.6- 4.0 Mpa.
Nominal Diameter: DN15-50 mm.
Body Material: cast steel.
Standard Flanges: DIN, ANSI, JIS, JB79.
Standard Screwed: NPT,BSP.
Material of Main Component.
Name of component | Material of component |
Valve body, valve cover | WCB |
Internal components | stainless steel |
Valve body, valve cover | WCB |
Internal components | stainless steel |
Main External Dimensions.
|
| Model | DN | A | C | D | B | Maximum pressure kg/cm 2 |
880 | 1/2 '' 3/4 '' | 96 | 128 | 70 | 146 | 25 | |
881 | 1/2 '' 3/4 '' 1 '' | 96 | 128 | 100 | 176 | 41 | |
882 | 3/4 '' 1 '' | 145 | 170 | 137 | 231 | 25 | |
883 | 1 '' 1 1/4'' | 180 | 202 | 193 | 313 | 25 | |
884 | 1 1/4' 1 1/2'' | 203 | 232 | 212 | 362 | 25 | |
885 | 1 1/2'' 2 '' | 220 | 250 | 248 | 396 | 25 |
| Model | DN | A | C | D | B | Maximum pressure kg/cm 2 |
881F | 15. 20 .25 | 96 | 170 | 100 | 176 | 25 | |
882F | 20 .25 | 145 | 210 | 137 | 131 | 41 | |
883F | 25 .32 | 180 | 270 | 193 | 314 | 25 | |
884F | 32 .40 | 203 | 320 | 212 | 362 | 25 | |
885F | 40 .50 | 220 | 320 | 248 | 396 | 25 | |
886F | 65 .80 | 265 | 400 | 310 | 799 | 25 |
Contact Us
- Yong Jia Goole Valve Co.,Ltd
- Contact nameEllison
- Phone86-577-57789960
- AddressOubei Town Wenzhou,Zhejiang
Control Valve | Pressure Reducing Valve | Safety Valve | Steam Trap |
Strainer |
- AST/OPC solenoid valve coil 300AA00086A for power generation
- globe valve SHV6.4 for power station
- temperature Regulating valve LWH-ZG1/2 for power plant
- Inclined groove three-way distributor Pneumatic electric circular three-way valve XZ500 distributor
- sealing oil floater tank float valve FY-40 for power generation
- Sinro Motorized Valve SR04GB32046B4 for power station
- servo valve G761-3034B for power plant
- Bare Stem Fluorine Lined Butterfly Valve
- Alpha split isolated valve ABvalve OEB5level
- AlphaAB valve split butterfly valve
- AB valve Split Isolated Valve split butterfly valve
- Manual Operated Wafer Type PTFE Lined Butterfly Valve
- Pneumatic PTFE Lined Diaphragm Valve
- solenoid valve 22FDA-F5T-W220R-20 for thermal power plant
- solenoid valve J-110VDC-DN10-Y/20H/2AL for power generation
- ealing oil float tank float valve BYF-40 for power station
- Air transfer chute three-way to curved four-way distributor valve
- B500 Air chute pneumatic closure valve Inflatable manual plugboard valve
- Aseptic transfer αβ Valve manufacturer sealed feeding powder transfer AB valve
- Manufacturer of high activity powder transfer AB valve split type butterfly valve
- makeup water solenoid valve K25FJ-1.6PA2 for power generation
- AST/OPC solenoid valve 0508.919T0301.AW027 for power plant
- X43T-10Cast iron copper core two-way flanged plug valve
- PTFE Lined Globe Valve
Popular Searches
Find Similar Products By Category
- Mechanical Parts & Fabrication Services > Valves
- Buy on GoldSupplier.com
- How to Buy
- Browse by Catagories
- Browse by Hot Regoins
- Private Sourcing Events
- Sell on GoldSupplier.com
- How to Sell
- Post Products
- Manage Products
- Manage Groups
- About
- About Us
- Link to Us
- Contact Us
- Sitemap
- Please Enter your Email Address
- Please enter the content for your inquiry.
We will find the most reliable suppliers for you according to your description.
Send Now-
Ellison
Welcome to my shop! Glad to serve you!Please send your question!
Your message has exceeded the limit.
Your message has exceeded the limit.
-
-
Your inquiry content must be between 20 to 5000 characters.Send Now.
-
Please input the mailbox.
-