Ceramic Sand Disc Granulator

Production introduction:              

Ceramic sand granulator is also called ceramic sand pan-pelletizer and Ceramic pelleting machine. It is mainly composed by disc, large bevel gear, bevel gear, the spindle box, horizontal shaft, angle adjusting device, scraper, transmission device, Housing and so on.

The motor is drived by gearbox and belt connection. Gearbox output shaft side with bevel gear, and meshing with large bevel  gear. The large bevel gear connected by screw bolt and disk .
So when the motor starting, The disk will rotate meantime.

It is a necessary equipment for pelletization process in the Non-ferrous or ferrous material industries, After the pelleting, The material will be smelted directly to increase the added valve. 

Features and Advantages:            

1. The whole process of granulation is inside the fully enclosed drum, and the drum interior is at slightly negative pressure state. It is without dust pollution, clean and environmental friendly.
2. Feed - mixing - nucleation - granulators - shaping,the whole process is controlled by computer through PLC. It is easy operation and high degree of automation;
3. After abrasion treatment, the rotor surface had made precise balancing to ensure movement stability, reliability and wear resistance under high rotational speed. So that the machine can work stable and reliable;
4. The scraper surface has had appropriate wear treatment. The bottom and the inside of the drum is equipped with wear-resistant liner, therefore, the entire drum parts have a long service life;
5. The drum discharge part is fully hydraulic drive. It has the advantages of high automation and reliable drum sealing.

Working Principle of Ceramic sand granulator:      

The working principle of ZKZL Series Clean Powerful Granulator is to utilize the reverse movement between low speed clockwise rotating drum and high speed counterclockwise rotating rotor to stir material at high speed. There are separate scrapers at the bottom part and wall of the drum. The interaction between drum wall cleaning by scraper and the movement with inclined rotating drum forms a special flow field to change the movement direction of material. Powdery material is "rubbed" to cores during high-speed movement and then and then granulated into a ball.

contact: Annchen

Email ID:ec03@zkcorp.com