12 V Learning Code Single Channel Remote Control Switch System

Product description

Our company designs and manufactures 1 CH muti-function wireless smart receiving controller, as a relay output switching signal, Allows the device to be controlled, the motor reach on or off to be mutual conversion, and various special control program requirements, Mainly used in electric doors, windows, lifting equipment, gateways, elevator, industrial control and security industry and other fields, 

The wireless receiving controller, with high confidentiality, stable performance, low power consumption characteristic, jump line or dial the code switch coding, Just put the remote control the emission of wireless signal for the receiving controller receiving and storage, that you can make them be a set to use, , This switch can learn different coding remote controls (such as 2262, 1527, , etc. )^and with working indicator, , Receiver in on state, the indicator is lighting, and it will clearly show the working state of the receiver. 

Output working ways: 

Jog. Self-lock. Inter-lock

It is the learning code switch (receiver )you can change the working way on yourself by the Jump cap on the working piont. 

Jog: Press one button is working. Loosen your finger on the same button is stop. Need one channel switch and one buttons remote control )

Self -lock: Press one button for one time is working. Press the same button again is stop. (need one channel switch and one buttons remote control 

Inter-lock: Press one button is working, press another button is stop. (need one channel switch and 2 buttons remote control 

Switchable Output working ways: 

1. Self-lock ---connect the JP1 and JP2 with the cutting out cap. 

2. Jog---the cutting-out cap is non-occupation, any JPs do not connect either. 

3. Inter-lock---- Connect the Jp2 and Jp3 with the Cutting out cap, 

Learning Method: 

Press the learning key, it means it has been putting in the learning state when the indicator light flash once still go out, , then you press any buttons of the remote control to transmit signals. It means studying successfully when the indicator flash 1 times until the light goes out. 

Note: This controller can learn different coding remote controls, If beyond, the first will be automatic clear, , 

4, the technical parameters

1, Working voltage: DC12V (or 24V)

2, Operating Current: ≤ 6mA

3, Operating Temperature: -20 ° C - +60 ° C

4, frequency: 315MHz /433MHz

5, Receiving sensitivity: -105Db

6, Output Voltage: AC and DC optional

7, Output current: ≤ 10A

Contact us for more details about Price, Packing, Shipping and Discount. 

Company Website: , explore for more product information! 

Hope to hear your kindly further talks.