Contact Platform Support
Help CenterASTM A333 Steel Pipe for Low-Temperature Service
Related Products
-
Steel Pipes for Low Temperature ServiceUS$ 100 - 100MOQ: 10 -
Steel Pipe for Low Temperature ServiceUS$ 100 - 100MOQ: 10
-
Alloy SMLS Steel Tubes, ASTM A213 Gr.T5, T9, T11, T22, T91US$ 100 - 100MOQ: 10
-
Supply Seamless Alloy Steel TubeUS$ 100 - 100MOQ: 10
-
ASTM Alloy Seamless Steel TubeUS$ 100 - 100MOQ: 10
ASTM A333 / A333M - Standard Specification for Seamless and Welded Steel Pipe for Low-Temperature Service
Product particular communication:
1) Size: 6.35 - 114.3 mm (OD) x 0.89 - 12.7mm (WT) ;
2) Tight tolerance, Smooth surface, Uniform mechanical property(Mechanical Properties equilibrium) ;
3) Heat treatment: BK, BKS, GBK, NBK,Stress Relief, Normalizing, Spheroidize Anneal, Annealing, Bright Annealing, Normalized, Quenched and Tempered, Solution Annealing, etc ;
4) Continuous stenciling as required ;
5) Rust prevention treatment, such as: immersion oil, lacquer, passivation, phosphating,etc;
6) Plastic plugs or caps on both ends as required ;
7) Packing Type: Round , Square, Rectangle, Hexagon. Streamline, etc.
8) Relevant Test: Chemical Component Analysis,Mechanical Properties(Ultimate tensile strength,Yield strength,Elongation),Technics Properties(Flattening Test,Flaring Test,Bending Test,Hardness Test,Blow Test,etc),
Exterior Size Inspection, Nondestructive Test,Hydrostatic Test;
9) Main Applications: Automobile and Bearing Industry, Mechanical and Structral Purpose, Boiler and Heat Exchanger, Hydraulic and Petrochemical Purpose, etc.
Commercial Information:
1) Delivery : Within 40 days ;
2) Min Order : 5 Tons; However, ERW and DOM Tube need 100 T Per Item ;
3) Packing way : As per our export standard for shipment ;
4) Term of payment : 30 T/T within 3 days after signing the contract, balance 70 before shipment. Or 30 T/T +70 irrepealable L/C ;
5) Delivery Port : Shanghai Port ;
6) Offer Validity : 5-7 Days ;
7) Container : 20\' or 40\', etc ;
8) Manufacture methods : Cold Finished Method.
Composition, %
| Grade 6 A | |
| Carbon, max | 0.30 |
| Manganese | 0.29–1.06 |
| Phosphorus, max | 0.025 |
| Sulfur, max | 0.025 |
A For each reduction of 0.01% carbon below 0.30%, an increase of 0.05% manganese above 1.06% would be permitted to a maximum of 1.35% manganese.
TENSILE REQUIREMENTS
| Grade 6 | |
| Tensile strength, min, psi (MPa) | 60 000 (415) |
| Yield strength, min, psi (MPa) | 35 000 (240) |
IMPACT TEMPERATURE
Minimum Impact Test Temperature -45 C(-50 F)
Tag:
ASTM A333 Seamless pipe
ASTM A333 GR.B alloy pipe
Seamless pipe ASTM A333
ASTM A333
ASTM A333M
Seamless ASTM a333 pipe
Seamless ASTM A333m pipe
Send Inquiry to This Supplier
You May Also Like
-
Boiler Pipe A213 T11 & 1.4922 Seamless Steel Pipe High Temperature Resistant Corrosion Proof Industrial HeatingNegotiableMOQ: 1 Ton
-
EN 10216-1 P235TR1 Seamless Non Alloy Steel Tube Pressure RussiaNegotiableMOQ: 1 Metric Ton
-
EN545 ISO2531 K9 Ductile Cast Iron Pipe Centrifugal Cast Water Supply Pipe DN100 DN150 DN200 DN300 Zinc Bitumen Coating for Potable WaterUS$ 500 - 600MOQ: 10 Metric Tons
-
Factory Direct Price Hot Gi Steel Pipe Welded Tubes Are Available in Full Size and Stock Hot SellingUS$ 300 - 850MOQ: 5 Tons
-
Q195 Galvanized Double Corrugated Pipe for Highway and Tunnel ProjectsNegotiableMOQ: 1 Kilogram
-
Waterstop Steel Plate for Construction Sites, Carbon Steel Q235, Galvanized for Pre-embedded Use in Basement of Water Conservancy ProjectsUS$ 10 - 12MOQ: 10 Meters
-
Galvanized Steel Pipe Balcony Railing Galvanized Steel Pipe Scaffolding Galvanized Steel Pipe 4 InchNegotiableMOQ: 1 Ton
-
Steel Pipe & Tube & Galvanized Steel Pipe，Q195、Q215、Q235B、Q355BNegotiableMOQ: 5 Metric Tons
-
Pickled Oiled ASTM A213 T2 T5 T9 T11 T91 Seamless Steel Pipes SMLS ASME SA106 SA335 SA210 Heat Exchanger Tube Alloy TubingUS$ 500 - 550MOQ: 10 Tons
-
Gi Steel Pipe Factory Price Hot Dipped 1/2/3/4 Inch Galvanized Iron Square Tube ERW Technique 6m Length WholesaleUS$ 620 - 860MOQ: 1 Ton
