Portable Rebar Upsetter Forging Machine For Rebar Splicing Environmental Protection

Portable Rebar Upsetter Forging Machine For Rebar Splicing Environmental Protection​
 

    1. Product Description
 
Rebar Upsetting Forging Machine use the cold heading principle to make the steel end for plastic deformation, diameter increased 16-32mm, and then processing thread.
 
Features:
 
1. High strength: the strength reach Grade I , stronger than the reinforcement bar
and guarantees bar break under tensile stress
(tensile strength of connection point =1.1 times of connected bar).
 
It can satisfy the requirements stipulated in the Chinese standard JGJ107-2003,JG171-2005.
 
2. Wide working range: adaptable for 16mm-32mm rebar of different standard.
 
3. High efficiency: upset forging and threading one joint only needs no more than one minute, and handy operation and quick link.
 
4. Environmental protection and economy profit: no environment pollution, can work all day, not affected by weather, economize energy source and bar material.
 
     
 
      
   2. Operation
 
1- Installation

       After the mold is installed, reset the stroke limiting bracket. Adjust the travel limit screw so that the stroke control in 15mm, insert the test steel bar to the top of the mold center hole press automation button. After the processing of the work-piece, measurement it. If failed, then adjust stroke limit screw to make the trip gradually increased, until processing of qualified products.
       
 
 2- Safety operation rules
1. Workers have to be trained and tested OK then can work.
2. Before operation with rebar, first running the machine 2-3 mins without processing, if it is running normally the process.
3. The feeding head of head should be plain and straight.
4. Before processing the rebar, the machine should be reset and then process
to ensure the same processing.
5. The processing rebar can not have the transverse cracks, when the equipment break down should be eliminated timely.
6. Oil should be 68# hydraulic oil.
7. Workers should obey the safety rules
 
3- Machine Failure and Exclusion         
                                                                                              

 
 
     3. Package & Delivery
 
      Package: in wooden case
      Delivery: 10-15 days after receiving the deposit.
       
     4. Our Service