ID - Mounted Electric Driven Pipe End Beveling Machine NODHA Brand

PIPE BEVELING MACHINE

The ID-Mounted beveling operation use an expandable mandrel which is insert into the open end of the pipe. Tighten

draw nut extend the expanding blocks and against the ID surface for positive mounting, self centered and squared to the bore. As the tool bit is fed into the pipe from the end, a bevel is finished which conforms to the bevel angle required. Bits are available for practically any material or beveling angle required, and bits can be custom made for any form tooling operation.

Features

In-Situ cold Beveling improves safety Easy installation & Operation Self-Centering Feed ratchet spanner makes tool feed or back easily Compact design & Light weight Electric/ Pneumatic driven for option Adjust Speed

Application

Oil & Gas filed Power Plant Chemical Plant Nuclear Power Plant Ship Building & Repair

Specification

Drive Options: Pneumatic, Electric Air requirement: 900L-1200L/Min@0.6Mpa Electric requirement: 220-240V 1PH 50/60HZ Feed mode: Feed spanner, manually Packaging: Plywood case

Selection Guide

Model	Clamping Range (ID)		Working Range (OD)		Wall Thickness
	mm		inch	mm	mm
80	28-76		3	88.9	≤15
120	40-110		4	114.3	≤15
252	80-240		10	273.05	≤20

Order Guide
 

Before you place order to us, please let us know the following information:

Choose the right Model

Confirm your electric power supply ( Voltage, frequency and phase)

Confirm the beveling angel required

Confirm the welding joint required (U, V, Double V or Compound preparation)

Advise your pipe material ( Carbon steel, stainless steel or others)

Other special demands about machine

The spare parts needed

If the pipe wall thickness more than 30mm, inform us in advance (Important)