Contact Platform Support
Help CenterWaterproofing 1.0mm Geomembrane Cover
Related Products
-
250g/sqm Geotextile for Filtration/erosion Control GeotextileUS$ 0.38 - 1.35MOQ: 2000 Square Meters -
High Quality Non Woven Geotextile for SeparationUS$ 0.38 - 1.25MOQ: 2000 Square Meters
-
Geomembrane LinerUS$ 0.5 - 1.5MOQ: 5000 Square Meters
-
0.2-4mm Manufacturer of Hdpe GeomembraneUS$ 1.5 - 3MOQ: 2000 Square Meters
-
Smooth and No Pollution HDPE LinerUS$ 0.5 - 1.8MOQ: 5000 Square Meters
Specifications
waterproofing 1.0mm Geomembrane cover:1.Smooth and water proofing
2.High intensity,good performance
waterproofing 1.0mm Geomembrane cover
introduction:
HDPE is produced on state-of-the-art 3 layer extruders to 7.0 m and 8.0 m wide rolls to ISO 9001. The product is available in smooth ranging in thickness from 0.5 mm to 2.5 mm, and textured ranging in thickness from 0.75 mm to 2.5 mm. The material is manufactured to strict specifications with all testing in accordance with ASTM standards.
waterproofing 1.0mm Geomembrane cover Feature:
- Excellent physical and mechanical performance
- High tearing resistance
- High puncture resistance
- High againg resistance
- Excellent high&low temperature resistance
- Excellent mechanical and UV resistance
- Perfect waterproof performance
Properties |
Test Method |
Value
|
|||||||
ASTM D5199 |
0.75 mm |
1.00 mm |
1.25 mm |
1.50 mm 60mil |
2.00 mm |
2.50 mm |
3.00 mm |
||
Density(Min.) |
ASTM D1505 |
0.940g/ml
|
|||||||
Tensile properties |
ASTM D6693 |
|
|
|
|
|
|
|
|
*Yield strength KN/m |
|
11 |
15 |
18 |
22 |
29 |
37 |
44 |
|
*Break strength KN/m |
|
20 |
27 |
33 |
40 |
53 |
67 |
80 |
|
*Yield elongation |
|
12% |
|||||||
*Break elongation |
|
700% |
|||||||
Tear resistance N |
ASTM D1004 |
93 |
125 |
156 |
187 |
249 |
311 |
374 |
|
Puncture resistance N |
ASTM D4833 |
240 |
320 |
400 |
480 |
640 |
800 |
960 |
|
Stress crack resistance /h |
ASTM D5397 |
300 |
|||||||
Carbon black content |
ASTM D1603 |
2.0-3.0% |
|||||||
Carbon black dispersion |
ASTM D5596 |
1 or 2 |
|||||||
(OIT) Oxidative induction time |
ASTM D3895 |
100 |
|||||||
Low temperature impact brittle property at -70°C |
|
Pass |
|||||||
Dimensional stability /% |
|
±2 |
|||||||
,
Send Inquiry to This Supplier
You May Also Like
-
High Adhesive, Water-proof, Anti Corrosion, Weather-resistant Asphalt Adhesive Glue Patch Cover for ConstructionNegotiableMOQ: 100 Rolls
-
2.0mm Textured HDPE Geomembrane Dual-Sided Friction for Slope ProtectionUS$ 9.5 - 10MOQ: 100 Square Meters
-
GeomembraneNegotiableMOQ: 2700 Rolls
-
Non-curable Rubber Paint Rubber Asphalt Waterproof Coating Made in ChinaUS$ 1.5 - 6MOQ: 500 Kilograms
-
Low Cost Waterproof Material ManufactureUS$ 1,000 - 50,000MOQ: 1 Set
-
PTFE Architectural Membrane MaterialNegotiableMOQ: 1
-
Special Compound BaseUS$ 0.12 - 0.25MOQ: 7000 Square Meters
-
PolyLock/HDPE Lock/ E Lock/ HDPE E Lock/Geomembrane Attaches HDPE GeomembranesUS$ 10 - 50MOQ: 1 Piece
-
Breathable House Wrap Membrane Roofing Waterproofing MembraneUS$ 0.42 - 0.42MOQ: 5000 Square Meters
-
<MIicroVENT> Waterproof Vent MembraneUS$ 0.1 - 3MOQ: 10000 Pieces
