Straw Bamboo Fuel Wood Pellet Machine With Automatic Lubricant Pump

Delivery Time:15 days after prepaid
Certification:CE

Straw Bamboo Fuel Wood Pellet Machine With Automatic Lubricant Pump

1. Brief introduction:

1.1 It can make the biomass, sawdust pellet from corn straw, green waste, bamboo powder, grazing, straw, rice hull, all kinds of wood and so on. It also can make feed-stuff pellets from corn, oil cake for the fish, chicken, animal and so on.
1.2 Use the cold press forming technique, polishing craft, good appearance, and compact structure;
1.3 High capacity, low consumption, low noise, little trouble, high efficiency, continuous work, economic and durable;
1.4 With Automatic lubrication system which can add oil into bearing automatically, protect the machines, prolong machine lifetime;
1.5 Whole machine is made by special high quality material, and KAF three-level gear box transmit equipment, main parts are used the high quality alloy steel with durable material, use the Germany vacuum stove hot principle, lifetime is bigger 5-7 times than common pellet mill.

2. The raw material scope:

All kinds of sawdust, straws, cotton stalk, rice husk, crop stalks, paddy straw, sunflower stalk, forestry wastes, wood chips, chemical waste, city garbage, agricultural waste, solid powder material and other different wastes.

3. Raw material moisture and size requirement:

3.1 Raw material moisture is required around 10-15%.
3.2 Raw material diameter is not extending 5mm. If bigger, please crushed first.

4. Main data: 

Model	Power(KW)	Capacity(kg/h)	Weight(kg)	Size(mm)
SK-350	30	300-500	1000	1650×700×1300
SK-450	37	500-700	1450	1650×750×1450
SK-550	45	800-1000	2000	1400×750×1600
SK-800	90	1500-2000	3000	1900×1000×2000
SK-1000	110	2500-3000	4800	2000×1000×2050

Different between ring die and flat die pellet machine:
 
1 Feeding ways are different
Ring die pellet machine adopts forced feeding method, raw materials enter into pelletizing chamber through high speed revolution, then the screaper in the machine distrubuted the raw materials evenly, whilte falt die pellet machine can feed evenly for the raw materials enter directly into the crushing chamber reply on theri own gravity. 
 
2 Pressure is different:
The pressure of ring die is fixed since ring die diamter of the ring die pellet mill is limited by the diamter mould of the ring die, so when the crude fiber materials are fed in, it is hard to produce high quality pellets with the limited pressure and the wear to the machine also very larger. On the contrary, the pressure of the falt die pellet mill is changeable and with great density cruder friner materials like stras and sawdust need high pressure to be pelletized can use flat die wood pellet mill. 
 
3 Dicharging ways are different 
Since the rotate speed or ring die is very high, the breakage of the pellets i high. Compared with ring die, flat die is low sepeed revolution, so the breakage is lower, flat die pellet mill canpelleti pellet with more smooth surface.