CE Safe Automatic Control Valve , Pneumatic Diaphragm Intelligent Angle Control Valve

Delivery Time:7-15 working days after received your payment
Certification:CE,TRCU,ISO9001

CE Safe Automatic Control Valve , Pneumatic Diaphragm Intelligent Angle Control Valve

Pneumatic diaphragm intelligent high differential pressure angle control valve

YSIQ(D)67 Series of Intelligent Angle Control Valve uses modular design and impact structure. The varieties combination of the trim components make it applicable for high pressure head, high viscosity paste or containing granular fluid conditions, as well as sites like serious being flashed, cavitated and pipe direction change needed.

ZM10 series multi-springs pneumatic reinforce actuator, makes the valve realize the conversion of normal close and normal open on site easily, the spring can be effectively protected from the corrosion to prolong the service life of actuator and convenient for customers operation. The actuator and the intelligent valve positioner are connected pipeless to strengthen the antisemitic performance,stability and precision adjustment, to meet to exactly control of the working conditions o:p>

Working principle:

    The equipped smart positioner will convert to valve required settings when receive normal signal of electricity or signal of computer. Then the pneumatic actuator linear displacement will change to angular displacement by valve special connections, and tested by position transducer then feedback to microprocessor.

    The microprocessor will compare the actual valve feedback with original settings and tested if there is any deviation. It will output pulse width modulation command(PWM) to piezoelectric valve according to the the size and direction of deviation. The piezoelectric valve will regulate the input or exhaust gas under the control command.

Main Parts Materials                                                                 Table 1

Item	Part Name	Material
1	Body	WCB	WC6	CF8	CF8M
2	Seat	304,316/Partial Stellite	316/Partial Stellite
3	Plug	Metal Sealing	304,316/Partial Stellite	316/Partial Stellite
Soft Sealing	304,316+Reinforced Teflon	316+Reinforced Teflon
4	Cage	304,316	316
5	Guide Sleeve	304,316	316
6	Stem	304,316	316
7	Bonnet	WCB	WC6	CF8	CF8M

*Above is the common materials,the specific grades take the contract as a standard.

Specification&Technical Parameter                                                   Table 2                          

Type	Top Guide Single Seat Angle
Nominal Diameter	DN20～DN400(3/4”～16”)
Nominal Pressure	PN16,25,40,64,100(150lb,300lb,600lb)
Flow Characteristic	Equal Percentage, Linear
Rangeability	50﹕1
Bonnet Form	Standard Type:Cast Steel :-20～250℃   Stainless Steel:-40～250℃
Fin-Extension Type:Cast Steel:-29～425℃   Stainless Steel:-40～450℃
Low-Temp. Type:Cast Stainless Steel:-60～-100℃,-100～-200℃,-200～-250℃
Seat Leakage	ANSI Ⅳ,V,Ⅵ(Soft Sealing)

Main Performance Index                                                              Table 3

No.

Item