Q2Z-100 25Ka 50Ka Automatic Transfer Switch With Dual Power High Short Circuit Breaking Capacity

Delivery Time:3-5 days
Certification:CE,FCC,MSDS

Q2Z-100 25Ka 50Ka Automatic Transfer Switch With Dual Power High Short Circuit Breaking Capacity 

GTQ2Z series automatic transfer switch (ATS) is suitable for the transfer between two power sources, common source (power supply Ⅰ) and standby power supply (power supply Ⅱ),whose rated voltage is below 50Hz,400V (AC) when one power supply malfunctions to assure the safe. and stable power supply. The setting mainly used for hospital, shopping center, bank, and chemical industry, metallurgy, high building, military facilities etc. important situation where power breaking can\'t be allowed.

Specifications:

Model	MCCB applied	Circuit breaker specification
Rated limit short -circuit breaking capacity Icu(KA)	Pole	Rated current (A)
L	M	3,4
GTQ2Z-63	GTM1-63 L,M	25	50	3,4	10,16,20,25,32,40,50,63
GTQ2Z-100	GTM1-100L,M	35	50	3,4	16,20,25,32,40,50,63,80,100
GTQ2Z-225	GTM1-225L,M	35	50	3,4	100,125,140,160,180,200,225
GTQ2Z-400	GTM1-400L,M	50	65	3,4	225,250,315,350,400
GTQ2Z-630	GTM1-630L,M	50	65	3,4	400,500,630
GTQ2Z-800	GTM1-800L,M	50	65	3,4	630,700,800

1. Provided with such protective functions as checking two sources of voltage at the same time,pr-otection when any one phase or one phase above experiences under over-voltage, guide phase.

2. When two sources have abnormal or faulty tripping (overload, short circuit), the controller won\'t send out the order to realize the protective function of reopening and closing.

3. Six working modes: manual control, self-throw self-recover, common source (power supply I), standby power supply (power supply Ⅱ), breaking electricity and re-tripping,self-throw no self-recover.

4. When the working mode is in the automatic control state, it has two self-throw no self-recover, self-throw, and self-recover functions:

a) Self-throw non-self recover: when the device enters the working state, power supplyⅠautomati-cally throws into supplying electricity; when power supply Ⅰ has an abnormity, it will automatically transfer to power supply Ⅱ; when power supplyⅠrecovers,it doesn\'t transfer until power supply Ⅱ has an abnormity, then it will automatically transfer to power supplyⅠ.

b) Self-throw and self-recover: when the device enters the working state, the common source throws into supplying electricity; when power supply has an abnormity, it will automatically transfer to standby powersupply; when common power supply recovers,it will automatically recover common power supply;but when the standby power supply has an abnormity, the controller will emit an alarm soured.

Jubang Electric Group is a professional Power Transmission and Distribution Solution Supplier&Manufacturer, devoting into manufacturing

Power Transformer Air Circuit Breaker Moulded Case Breaker Automatic Transfer Switch Transmassion and Distribution

<> ISO9001 quality management system

<> ISO14001 environmental management system

<> Three OHSAS18001 Occupational Safety and Health Management System certification

<> PCCC certification and energy-saving products certification for compulsory product certification

<>GB1094.1-1996 GB1094.2-1996 JB/T 10088-2004

<>GB1094.3-2003 GB1094.5-2008 

M

WHY ALWAYS US ? 

1.     Direct manufacturer, high quality guaranteed.

2.     No cheating on workmanship and materials.

3.     Large investment in R&D, keep upgrading products.

4.     Specifications are real and reliable, with highly recommended certificates.

5.     Complete product range, provide compact power solution.

6.     Advanced assembly line equipment with professional workers.

7.     All types of transformers and circuit breakers with mature technology.

Contact: