16M Turbo Fan Truck Side Draft Paint Booth Coating Environmentally Friendly

Delivery Time:10-15 working days
Certification:CE, TUV

16M Turbo Fan Truck Side Draft Paint Booth Coating Environmentally Friendly

Features

1. 0.476mm color steel with EPS inside for wall panel.

2. Quality brand name turbo fan,with air capacity of 25000m ³/h

3. Pneumatic damper for spraying to baking cycle.

4. All panels are tongue and groove interlock structure

5. Control panel and other electric components can be purchased separately

Advantage

In painting, outside fresh air comes into the heating generators through the pre-filter system, and enters into the plenum, then filtered by ceiling filter and into the both which brings clean,

symmetrical and steady-going down airflow for spraying,After painting, Hot air goes from heating

generators to plenum, then enters room after filtered by ceiling filter, providing heat that is necessary for baking of cars surface. Afterwards, the air with little benzene will be released to the atmosphere after being filtered twice by the exhaust air filter

 .

Item	Detailed Specification
Inside dimension	16000×5000×5000 mm (L×W×H)
Outside dimension	16140×6640×5600mm (L×W×H)
Front door	Folding door, 4 folds, 4000×4500 mm (W×H), galvanized steel frame, cold plate powder coated window frame, white colour.
Emergency door	2 units, 800×2000mm (W×H), colour: white.
Basement	No steel basement, 2 lines pits in the ground for the exhaust, size of each pit: 13850×760mm(L×W), with galvanized twisted grilles above.
Wall panel	Profiled bar beams in the roof to strengthen the room body, thickness: 70mm, width:1150mm, tongue and groove structure, 0.476mm colour steel with EPS inside, colour: white.
Light	Ceiling Lights: 18Units×4Pcs=72Pcs×36W, side lights: 12Units×2Pcs=48Pcs×36W, up and down interleaving installation, with electronic ballasts, lighting boxes are powered coated.
Generator cabinet	Intake from back upper, exhaust from rear upper, quadrate steel frame; white machine-made panel covered, filled with heat preservation material inside.
Intake and Exhaust system	Inlet: 2×11KW turbo fan, air capacity for each fan: 30000m3/h.
	Outlet: 2×11KW turbo fan, air capacity for each fan: 30000m3/h.. Manual damper, 16m ducts, 2 pcs 900 bend, 2 pcs 300 bend, 2 pcs intake hoop.
Heating system	2 sets Italy RIELLO RG5S diesel burner, stainless steel heat exchanger, pneumatic damper actuates from spraying to baking cycle. Max. heating productivity: 520000kcal/h, max temperature: 80℃, 8pcs chimney, 2 pcs bend.
Purification system	Pre-filter (pocket type), ceiling filter, fibreglass filter, activated carbon filter (pocket type).
Roof	50mm EPS panel.
Control system	Spraying, heat spraying, baking, time setting, lighting switch, failure indicator, thermostat, power supply switch, emergency stop, hour meater, temperature limiter, all motors is reduced voltage starting.
Total power	50KW (Power supply 1×220V, 3×380V, 50HZ)