Titanium Sheet

1. product brief introduction     Our titanium plate include two kinds: pure titanium plate and titanium alloy plate. Pure titanium plate is mainly used in processing watch strap,Website: , WATCH-BUTTOM, heat exchange tube for plate heat exchanger, titanium mesh, cathode line/corona line for the electrostatic precipitator (oil tank), titanium plating bath, titanium-steel clad plate, large equipment (heat exchanger, reaction kettle) target, tube plate/ blind plate, flange, etc. Alloy plate usually are TC4 plate, is mainly used in the processing various of cutting tools, and sonic soot blower diaphragm for power plant dust-removing.2. The product specificationThickness: 0.5mm-200mmTitanium strip coil: 0.1mm-0.5mm(thickness) *1m/1.2m/1.5m(width)Standard sheet: 0.5mm-20mm(thickness)*1m*2mCold-rolled sheet: 1mm-4mm*1m*2mHot rolled plate: thickness ≥4mmWide Thick Plate：≥5mm *2m*6mThe above are commonly used specifications, specific specifications can also be customized according to customer request.3. The materialTA1（Grade 1）、TA2（Grade 2）TA9（Grade 7）、TA10（Grade 12）、TA18TC4（Grade 5）、TC6、TC114. Performance standardsChemical composition meet the ASTM_B_265-2010 standard and other standard you required.5. Properties of the standardReference standard of Chemical composition GradeAlVN.maxC.maxH.maxFe.maxO.maxResiduals(ea) maxResiduals(total) maxGr10.030.080.0150.200.180.10.40Gr20.030.080.0150.300.250.10.40Gr55.5-6.753.5-4.50.050.080.0150.400.200.10.40Reference standard of mechanical property Graderoom-temperature mechanical properties, not less thanYield strengthUltimate StrengthElongation in 50 mm, A5Reduction in AreaGrade1170 MPa240 MPa25%30%Grade2275 MPa345   MPa20%30%Grade5825   MPa895   MPa10%20%Plate thickness deviation should be allowed to meet ThicknessWidth400~1000>1000~2000>20000.3~0.5±0.05——>0.5~0.8±0.07——>0.8-1.1±0.09——>1.1~1.5±0.11——>1.5~2.0±0.15——>2.0~3.0±0.18——>3.0~4.0±0.22——>4.0~6.0±0.35±0.40—>6.0~8.0±0.40±0.60±0.80>8.0~10.0±0.50±0.60±0.80>10.0~15.0±0.70±0.80±1.00>15.0~20.0±0.70±0.90±1.10>20.0~30.0±0.90±1.00±1.20>30.0~40.0±1.10±1.20±1.50>40.0~50.0±1.12±1.50±2.00>50.0~60.0±1.60±2.00±2.50Process performancePlate bending mandrel diameter and bending Angle GradeStateThickness/mmbending mandrel diameter /mmbending Angle a/°Gr1M<1.83T1051.8~4.754TGr2M<1.84T1.8~4.755TGr5M<1.89T1051.8~4.7510T6. Our advantagesa. More 10 years experience, we are the factory. b. Factory direct sales with competitive price. c. Sophisticated technology, excellent quality.