Contact Platform Support
Help CenterAnticorrosive Protection Adhesive Underground Pipe Wrapping Tape Pipeline Coating Materials
Related Products
-
Corrosion Resistant Coatings for Steel Pipe Wrapping Tape / Polyethylene Pipe Coating TapeNegotiableMOQ: 1 Piece -
Black Underground Pipe Anti Corrosion Coatings Material / Anti Corrosion Pipe Wrap TapeNegotiableMOQ: 1 Piece
-
Eco-friendly Anti Corrosion Coatings Pipeline Tape for Steel Pipes Coating MaterialsNegotiableMOQ: 1 Piece
-
LDPE or HDPE High Strength Butyl Rubber Sealant Tape for Buried or Immersed Steel PipelinesNegotiableMOQ: 1 Piece
-
Heat Resistant Anti Corrosive Butyl Rubber Tape / Adhesive Waterproof Tape Anti CorrosionNegotiableMOQ: 1 Piece
Certification:ISO 9001,ISO 14001,OHSAS 18001,SGS,DVGW
0.635mm thickness and 170m long China pipeline Anti corrosion coating tape
Anti corrosion coating materials is Cold applied tape coating system for corrosion protection of Oil, Gas, Petrochemical, and Waste Water underground or overhead pipelines.
Structure:
The specification of the tape consists of two layers, adhesive layer and film backing
Adhesive: Butyl rubber
Film backing: Special blend of stabilized polyethylene
Features:
This product has been made by a special processing of butyl rubber to P.E. Its durability is strong and electric corrosion can be prevented. The pipe can be semi-permanently preserved which has an excellent effect on its corrosion resistance. It has a permanent and continuous adhesion effect, this outstanding combination of butyl rubber adhesion and P.E, make good weather resistance, outstanding electric and chemical characteristics and good workability for ease in both manual and machine work.
Usage:
1) Anti-corrosion of water pipe, gas pipe, oil pipe, etc
2) Anti-corrosion of electric wire, voltage and communication cable
3) Anti-corrosion of pipe in chemical factories having severe moisture and corrosion
4) Anti-corrosion of various pipe lines
Application temperature : -34°C ~ 71°C
Service temperature : -34°C ~ 85°C
Physical Properties
|
Item |
T-150 |
T-165 |
T-180 |
|
Total thickness |
0.51 mm |
0.65 mm |
0.80 mm |
|
Polyethylene Film |
0.31 mm |
0.34 mm |
0.39 mm |
|
Synthetic Adhesive |
0.20 mm |
0.31 mm |
0.41 mm |
|
Elongation at Break |
³ 400% |
||
|
Tensile Strength |
55 N/cm |
60 N/cm |
63 N/cm |
|
Yield Strength |
35.5 N/cm |
42.3 N/cm |
45.5 N/cm |
|
Peel Adhesion to Primed Pipe |
25 N/cm |
30 N/cm |
33 N/cm |
|
Dielectric Strength |
35 KV/mm |
45.8 KV/mm |
48 KV/mm |
|
Cathodic Disbandment |
0.24 in radius 6.4 mm |
||
|
Volume Resistivity |
2.5 x 1012 ohm.m |
||
|
Water Vapor Transmission Rate |
£ 0.1gm/M2/24h |
||
|
Water Absorption Rate |
< 0.10% |
||
|
Recommended Application Temperature |
-5 to +600 C |
||
|
Max Serve Temperature |
-40 to + 850 C |
||
|
Color |
Black |
||
|
Available Roll Size (width x length) |
2\" to 32\" X 50’ to 800’ |
How to use?
1) Pipe surface processing
thoroughly clean the surface of the pipe by removing all foreign material.
Completely remove any sharp projections from the area of the weld.
Remove all rust and/or other impurities using a steel brush.
2) Apply primer
Before application, shake or mix primer thoroughly.
Because it is highly volatile, make sure it is securely sealed after use.
Because it contains inflammable solvents, use caution when working near any open flames.
To obtain best results, apply primer in a temperature range of 0°C~25°C and for storage a
Temperature of -20°C~35°C is best.
Proper volume of primer is 100g per 1m².
When primer is applied and PE anti-corrosive tape is used, it is recommended to apply the
tape within a short time after the primer is completely dry.
Features to the Client & Industry
Major global Polyethylene tape manufacture
Vertical integration of our process and products
Project management
Products approved by most int’l standards
2 Ply and 3 Ply calendered tape system
Send Inquiry to This Supplier
You May Also Like
-
Stackable PP Hollow Sheet Foldable Containers – Space-Saving Agricultural PackagingNegotiableMOQ: 3000 Pieces
-
Packaging CartonsNegotiableMOQ: 20000 Pieces
-
Packaging Cardboard BoxesUS$ 0.1 - 5MOQ: 100 Pieces
-
Plastic Clear Sock Packaging Box,Column BoxesUS$ 0.035 - 0.269MOQ: 10000 Pieces
-
Three-side Sealed Pouch - Dried Fruit Packing BagsNegotiableMOQ: 1 Piece
-
Customize Plastic Box Assembly GEC024US$ 0.8 - 1MOQ: 1000 Pieces
-
Small Folding Gift Box,Cheap Belt Loop Folding Reading Glasses CaseUS$ 0.65 - 1.38MOQ: 1000 Pieces
-
2016 Fashion Design Wine Bag Customized Luxury Wine Bag Portable Gift Bag With ToteUS$ 4.50 - 4.80MOQ: 2000 Pieces
-
New Glass Lid Bamboo Personalized Tea Box With 6 Compartment For SaleUS$ 4.99 - 15.99MOQ: 1000 Pieces
-
FRP Delivery Box, FactoryUS$ 70 - 120MOQ: 20 Pieces
