Contact Platform Support
Help CenterBlack Underground Pipe Anti Corrosion Coatings Material / Anti Corrosion Pipe Wrap Tape
Related Products
-
Eco-friendly Anti Corrosion Coatings Pipeline Tape for Steel Pipes Coating MaterialsNegotiableMOQ: 1 Piece -
Anticorrosive Protection Adhesive Underground Pipe Wrapping Tape Pipeline Coating MaterialsNegotiableMOQ: 1 Piece
-
Corrosion Resistant Coatings for Steel Pipe Wrapping Tape / Polyethylene Pipe Coating TapeNegotiableMOQ: 1 Piece
-
LDPE or HDPE High Strength Butyl Rubber Sealant Tape for Buried or Immersed Steel PipelinesNegotiableMOQ: 1 Piece
-
Heat Resistant Anti Corrosive Butyl Rubber Tape / Adhesive Waterproof Tape Anti CorrosionNegotiableMOQ: 1 Piece
Certification:ISO 9001,ISO 14001,OHSAS 18001,SGS,DVGW
Black Underground Pipe Anti corrosion Coating Materials 50mm and 100mm width
Anti corrosion coating materials is Cold applied tape coating system for corrosion protection of Oil, Gas, Petrochemical, and Waste Water underground or overhead pipelines.
Features:
This product has been made by a special processing of butyl rubber to P.E. Its durability is strong and electric corrosion can be prevented. The pipe can be semi-permanently preserved which has an excellent effect on its corrosion resistance. It has a permanent and continuous adhesion effect, this outstanding combination of butyl rubber adhesion and P.E, make good weather resistance, outstanding electric and chemical characteristics and good workability for ease in both manual and machine work.
Usage:
1) Anti-corrosion of water pipe, gas pipe, oil pipe, etc
2) Anti-corrosion of electric wire, voltage and communication cable
3) Anti-corrosion of pipe in chemical factories having severe moisture and corrosion
4) Anti-corrosion of various pipe lines
Application temperature : -34°C ~ 71°C
Service temperature : -34°C ~ 85°C
Approvals by Int’l Standards
DIN 30672
EN Standards EN 12068
ASTM Test Methods ASTM D 1000
American Water Standards (AWWA) C 209 & 214
Indonesian Standards (PERTAMINA)
Iran Standards-NIGC & IGS
China Standards SYT 0414-2007
Physical Properties
|
Item |
T-150 |
T-165 |
T-180 |
|
Total thickness |
0.51 mm |
0.65 mm |
0.80 mm |
|
Polyethylene Film |
0.31 mm |
0.34 mm |
0.39 mm |
|
Synthetic Adhesive |
0.20 mm |
0.31 mm |
0.41 mm |
|
Elongation at Break |
³ 400% |
||
|
Tensile Strength |
55 N/cm |
60 N/cm |
63 N/cm |
|
Yield Strength |
35.5 N/cm |
42.3 N/cm |
45.5 N/cm |
|
Peel Adhesion to Primed Pipe |
25 N/cm |
30 N/cm |
33 N/cm |
|
Dielectric Strength |
35 KV/mm |
45.8 KV/mm |
48 KV/mm |
|
Cathodic Disbandment |
0.24 in radius 6.4 mm |
||
|
Volume Resistivity |
2.5 x 1012 ohm.m |
||
|
Water Vapor Transmission Rate |
£ 0.1gm/M2/24h |
||
|
Water Absorption Rate |
< 0.10% |
||
|
Recommended Application Temperature |
-5 to +600 C |
||
|
Max Serve Temperature |
-40 to + 850 C |
||
|
Color |
Black |
||
|
Available Roll Size (width x length) |
2\" to 32\" X 50’ to 800’ |
How to use?
1) Pipe surface processing
thoroughly clean the surface of the pipe by removing all foreign material.
Completely remove any sharp projections from the area of the weld.
Remove all rust and/or other impurities using a steel brush.
2) Apply primer
Before application, shake or mix primer thoroughly.
Because it is highly volatile, make sure it is securely sealed after use.
Because it contains inflammable solvents, use caution when working near any open flames.
To obtain best results, apply primer in a temperature range of 0°C~25°C and for storage a
Temperature of -20°C~35°C is best.
Proper volume of primer is 100g per 1m².
When primer is applied and PE anti-corrosive tape is used, it is recommended to apply the
tape within a short time after the primer is completely dry.
Size:
thickness: 0.3mm-2.0mm
width: 10mm--500mm
length:10m-500m
Send Inquiry to This Supplier
You May Also Like
-
PET Release Film Transparent and Matte Insulation Film JB1256-77 Standard for Industry Use in RollNegotiableMOQ: 1 Tray
-
Silage Film Silage Stretch FilmUS$ 2.0 - 3.5MOQ: 1000 Kilograms
-
Foam PackagingNegotiableMOQ: 2300 Rolls
-
PE Bottom Film for Sanitary Napkin and DiapersUS$ 2 - 2.35MOQ: 1 Ton
-
Transparent Low Density Polyethylene Plastic Film for FoodUS$ 0.5 - 3MOQ: 100 Rolls
-
High Quality 9 Color Printed PVC Shrink Sleeve LabelUS$ 2,190 - 2,250MOQ: 1 Ton
-
PE FilmNegotiableMOQ: 1
-
Transparent Stretch Film in RollsNegotiableMOQ: 25 Boxes
-
Made in China Superior Quality Anti-UV Plastic FilmNegotiableMOQ: 5000 Kilograms
-
China Lldpe Pallet Stretch FilmUS$ 1.72 - 2MOQ: 100 Rolls
