5.5KW Roll Forming Machine For Colored Roof Panel PPGI GI

Delivery Time:60days after received your payment
Certification:ISO9001

Roofing Forming Machine

A. Technical specification

1. Profile

2. Components

Item	Name	Quantity	Remark
1	Decoiler	1	passive
2	Main machine	1	Including guide feeding, main roll forming machine, cutting device
3	PLC control	1	Cut to length
4	Hydraulic system	1	5.5kw
5	Output table	3	manual

3. Main technical parameters

1. Decoiler: passive feeding, manually tense

2. Main motor power: 5.5KW

3. Hydraulic station motor power: 3 KW

4. Forming stations, 16 stands

5. Forming speed: 15m/min

6. Roller material: NO.45 steel with plating chrome

7. Main shaft diameter: 76 mm

8. Main shaft material: NO.45 steel with treatment

9. Shear material, Cr12with quenching

10. Rolling thickness: 0.3-0.8mm

11. Hardness: G550MPA

12. Coil width: 940mm

13. Cut to length: 10m±2mm

14. Profile measure up to Chinese GBT/12755-91 standard

15. Frequency: Panasonic

16. PLC system: Panasonic

17. Computer operation board: 7 inches of kunlun

(2)PLC control system

1. Computer adopt PLC control system: Panasonic

2. Computer operating board: 7inches of KunLun pass ty

3. Frequency: Panasonic

Function and operation: Control the starting, operation and stopping of the complete line, including distribution section, operation table, counting instrument. Use PLC to control, set and adjust the length. Both man-made and auto operations: on the man-made condition, each equipment can be operated by switch.

4. Flow Chart

Put coils ----- leveling ----- roll forming ----- cutting after forming ----- output products