High Performance Gas Chromatography Equipment GC650 With 5 Sample Injectors

Delivery Time:Contact for confirmation
Certification:CE

High Performance Gas Chromatography Equipment GC650 With 5 Sample Injectors

GC650

5 kinds of sample injectors and all conventional detectors can be attachable depending on samples for analysis. In particular, for analysis of environmental samples (water quality, air, soil and wastes) satisfactory outcome can be achieved by connecting a sample preparation system such as the Purge & Trap.

Features of the GC650

 Automatic flow control and ignition of the FID-flame  Auto-start of chromatogram when sample is injected Gas save function (Capillary Injector) TCD maximum current control based on the type of gas Optional valves (solenoid, 2-position) control function Automatic notification of power-of

Intelligent Pneumatic Control (IPC)

Full automatic flow control of IPC Pressure range: 0-100psi (resolution: 0.01psi) Flow range: 0-500mL/min (resolution: 0.01mL/min) Split ratio up to 5000:1

Specifications

Column Oven
Inner volume	16.25 liter (250mm W* 260mm D*250mm H)
Temperature Range	Ambient to 450℃ (Optional: -100℃ to 450℃ by using a cryogenic valve)
Linear Programming Rate	Max: 120℃/min up to 450℃/min (0.1℃ increment)
Heating Rate	About 2.3 minutes 50℃ to 300℃
Cooling Rate	About 6 minutes 300℃ to 50℃
Run Time	Automatically computed to 999.9 minutes by 0.1 minute increments
Temp. Programming	20 Step
Pneumatics (IPC Module)
IPC pressure range	0 to 100psi
IPC flow range	0 to 500mL/min
Pressure resolution	0.01psi
Flow resolution	0.01mL/min
Support IPC Channels	Up to 20, for inlets, detectors or auxiliary gases (including pressure channel)
Pressure/flow programming steps	up to 5 steps
EPC control	Inlets and detectors (carrier, split vent, make-up and combustion gases)
Split ratio	up to 5000:1
Detector Modules Flow set range
FID/NPD make-up	0-100 mL/min
FID air	0-500 mL/min
FID hydrogen	0-100 mL/min
TCD make-up	0-12 mL/min
TCD reference	0-100 mL/min
FPD make-up	0-130 mL/min
FPD air	0-250 mL/min
FPD hydrogen	0-300 mL/min
Inlet Modules Pressure sensor
Accuracy	±2% full scale
Repeatability	±0.05psi
Temp. coefficient	±0.01psi/℃
Inlet Modules Flow sensor
Accuracy	±5% depending on carrier gas
Repeatability	±0.35% of set point
Temp. coefficient	±0.20mL/min normalized temp. and pressure
Data Acquisition System
Dynamic range	>2*106
Sampling Rate	User selectable 10-60Hz per channel
Analog signal voltage ranges	±10,5,2.5,1.25V
Analog to digital conversion resolution	21 bits at all sampling rates
External event I/O ports	8
Remote	Start, stop control independent
Data Visualization	Up to chromatograms in real time, zoom/unzoom at any time; Scrutinize focused peaks, display baseline; Chromatograms overlap, background subtraction.
Data Management	Data export results as Text files; Dynamic data exchange to Microsoft windows applications; Various data management techniques support the time event programming (17items).
Custom reports	Peak number, retention time, peak name, peak area, peak height, area%, height%, peak start time, theoretical plates, capacity factor, peak resolution, peak asymmetry, regression coefficient value, correlation coefficient value, standard deviation, weight function, relative retention time, calibration equations.
Dimensions, weight and power
Dimensions	425mm(W)*555mm(D)*450mm(H)
Weight	30Kg
Power	220V, 50/60Hz, 2.5kW

Inlet System (Injector)
Maximum installed Qty.	2