Home > Products > New product > 2-Mbps,2-Wire,G.SHDSL Modem:MSDSL
2-Mbps,2-Wire,G.SHDSL Modem:MSDSL
- 0 Case / Cases per Month
- T/T L/C D/P D/A
- 7 days
- ZTE 5928E, RS-5928E, RS-59EC-PWR-AC10, RS-59EC-PWR-DC10, 24 GE RJ45 + 1 expansion card ZTE ZXR10 5928E 5952E 5916E RS-5916E RS-
- ZTE 2952E, RS-2952E-AC, RS-2952E-DC, 48 FE RJ45 4 GE SFP ZTE ZXR10 2952E 2928E 2918E 2910E
- ZTE 3950-28TM, RS-3950-28TM-AC, 24 FE RJ45 + 2 GE SFP + 1 expansion card slot ZTE ZXR10 3950
- ZTE 2950-18TC, RS-2950-18TC-AC, 16 FE RJ45 + 2 GE Combo ZTE ZXR10 2950
- ZTE S2XF48A, 48-port 10GE SFP+ optical interface ZTE ZXR10 8902E 8905E 8908E 8912E RS-8902E RS-8905E RS-8908E RS-8912E
- ZTE 5250-28PM-H, RS-5250-28PM-H, 20 GE RJ45 (POE/POE+) + 4 GE Combo ports + 1 expansion card ZTE ZXR10 5250
Product Details
Place of Origin: | China |
Product Description
2-Mbps,2-Wire,G.SHDSL Modem:MSDSL
contact:Cenny
E-mail:cenny[at]
MSN:cenny.xu[at]
Features & Benefits
>> to use ITU G.shdsl standard 2-wire 2304Kbps MSDSL modem
>>3.5km-9.7km transmitting distance in special lines with 24AWG(0.5mm) and 26 AWG(0.4mm)
>> optional digital interface: V.35 and G.703, rate support
N*64Kbps(3<=N<=36), 2304Kbps can be reached highest
>>need not setup rate of slave modem, It follows the speed rate master modem automatically. So it is carried out to administrate the remote equipments in networks
>>there are many indicator LEDs on the panel to display work state and line of equipment
>>high-powered 2B1Qline coding technology is used
>>low operating cost, simple manipulation, convenient use, need not any software setting up
>>the test of analog loopback and digital loopback will be finished by keys of front panel
>> independent machine have two power supplying modes: alternating current and direct current-48V
Overview
MSDSL is FPGA-based 2-wire 2304Kbps modem. According with ITU G.SHDSL standard, with best concocting technology and very good frequency spectrum compatibility, It has 3.5km-9.7km transmission distance in special lines with 24AWG(0.5mm) and 26 AWG(0.4mm). It can be used in every high-grade and high-speed telecom operation such as transmitting voice, data and images. It also supports N*64Kbps rate (N=1~32) of interface of V.35 and E1(G.703). MSDSL has strong supervisory control function. You can learn from the panel the start-up, running and line malfunctioning, and so on. When the system is malfunctioning, one can locate the fault expediently with loop back test to administrate networks.
The operating cost is low. Operation is simple. Installation conveniently. One can use the DIP switch on the back panel to setup work mode and transmission rate while slave modem can automatically follow master modem rate(that is the rate switch of the slave need not to work). So you can administrate the remote equipments in networks. There are many indicator LEDs on the panel to display work status and line of equipment
Specifications
Line interface
Fully conforming to standard of YDN 056-1997
Transmission rate:
N*64Kbps+8Kbps(N=3~36)
Code:
PAM16
Line impedance:
135ohm
Signal electrical level:
+13.5 +/- 0.5dbm
Line wire interface:
a pair of passive twisted-line, RJ45
Code error rate:
<=10 -9
Transmission distance without linkup:
3.5~9.7Km(0.4~0.8mm wire size)
Data interface 1 (E1 interface)
Transmission rate:
N * 64Kbps(N=1~32)
Line coding:
HDB3
Line impedance:
75ohm/120ohm
Interface standard:
according with CCITT G.703 standard
Data interface 2 (V.35 /V.24)
Transmission rate:
N *64Kbps(N=3~36);V24(64K; 128K;)
Work mode:
DCE
Work circumstances
Power supply:
220VAC+/-10%,50Hz;48VDC(optional)
Power consumption:
<5W
Volume:
225mm*145mm*40mm
9"L*5.8"W*1.6"H
Temperature:
Relative humidity:
0oC~ +40oC
0~95%
I'm Cenny, a sales manager of Bell Data Communication Equipments Co., Ltd , a China local manufacturer . Our products brand is VeeCOM(LANBEL) .
Our major products series are:G.703/E1 to V.35 and ethernet Converters/DSL CPE/ADSL SYSTEM/Multiplexers/Bridges/Modems/Switch/E1&T1 equipment/Fiber Equipment/wireless modem/ADSL modem(The particular products are shown on our website:
or the website in alibaba: / ).
contact:Cenny
E-mail:cenny[at]
MSN:cenny.xu[at]
Company: Changzhou Bell Data Communication Equipments Co., Ltd
Website:
Add: 15A Zhongnan Building, NO.33 Guanhe west road, Changzhou, Jiangsu, China
Tel: +86-0519-6809961 6809962 6809963 6809965
Fax: +86-0519- 6809967
Postalcode: 213003
trademanager ID:cgs_cenny
Contact Us
- Changzhou Bell Data Communication Equipments Co., Ltd
- Contact namecenny
- Phone0086-0519-6809961
- Address15A Zhongnan Building, NO.33 Guanhe west road, Changzhou, Jiangsu, China Changzhou,Jiangsu
New product |
- Fortinet FortiGate-200F Enterprise-class flying tower firewall FG-200F Brand new original licensed goods
- 1240/1310nm Single Mode WDM
- FortiGate FortiWiFi 80F Series FG-80F/FG-81F
- 2x2 Magnet Fiber Optical Switch 1550nm
- 1550nm 1x4 Magnet Fiber Optical Switch SM
- 1520-1580nm 1x2 Magnet Fiber Optical Switch
- Magneto optical switch 1XN
- Magneto optical switch 1X1
- Magneto optical switch 1X1
- Magneto optical switch 1X4
- Magneto optical switch 1X2
- MEMS optical attenuator module
Popular Searches
- Optical Amplifier
- joint closure
- termination
- fiber optic
- ftth
- telecommunication
- Camera Dome Enclosure
- video transceiver
- distribution box
- Fiber Optic Equipment
- fusion splicer
- optical fiber splicing machine
- fiber optic fusion splicer
- fiber optic adapter
- optical fiber fusion splicer
- machine fiber optic fusion
Find Similar Products By Category
- Telecommunications > Communication Equipment > Fiber Optic Equipment
- Buy on GoldSupplier.com
- How to Buy
- Browse by Catagories
- Browse by Hot Regoins
- Private Sourcing Events
- Sell on GoldSupplier.com
- How to Sell
- Post Products
- Manage Products
- Manage Groups
- About
- About Us
- Link to Us
- Contact Us
- Sitemap
- Please Enter your Email Address
- Please enter the content for your inquiry.
We will find the most reliable suppliers for you according to your description.
Send Now-
cenny
Welcome to my shop! Glad to serve you!Please send your question!
Your message has exceeded the limit.
Your message has exceeded the limit.
-
-
Your inquiry content must be between 20 to 5000 characters.Send Now.
-
Please input the mailbox.
-