HRC Hydraulic Cutting Machine For Cold Rolled Steel (0.5-3mm)*1250mm

Delivery Time:in 60-90days

HRC Hydraulic Cutting Machine For Cold Rolled Steel (0.5-3mm)*1250mm

Application:CR/HRC/stainless steel /galvanized thickness of coil plate:0.5-2mm width of coil plate:1250mm coil weight:10MT(max) line speed:0-40m/min

Specifications:

Application:	CR/HRC/stainless steel /galvanized and so on
thickness of coil plate:	0.5-2mm
width of coil plate:	1250mm
coil weight:	10MT(max)
coil I.D:	ф508
coil O.D:	ф1600mm
the diameter of slitting blade shaft	ф120
slitting blade:	Φ120Xφ200X10
material of slitting blade:	6Crw2Si
the hardness of slitting blade:	HRC58°-60°
recoiler I.D:	φ508
power:	380V/50Hz/3Ph
tolerance of width error:	≤±0.05mm/2M
line speed	0-40m/min
area of the whole machine:	30m(L)x6m(W)
Production orientation	from right to left

ZJX-0.5-2X1250mm hydraulic slitting line is used for slitting the carbon plate to prepare for the next process.

1. Hydraulic coil Car (1.5KW)
◆The car can move levelly and vertically, which is convenient for putting the steel coils to the un-coiler.
◆It is driven vertically by hydraulic cylinder with 4 guide pillars.
◆The level movement is driven by cycloid motor.

2. Hydraulic de-coiler (7.5KW)
◆supporting steel rolls and uncoiling
◆the movable structure of double way hydraulic top tight
◆hydraulic pressure drives the level and landscape orientation movement

3. Slitting machine (15KW)
◆Drive system consists of drive stand, decelerator, 15KW motor, the gear distribution box,
coupler, connection shafts and cover.
◆Main section is made up of base, fixed brackets, large slide block, 2 blade pivot(Φ120mm ),movable brackets, slide block, the adjustment device of front and back of the brackets and the lifting device of blade pivot, supporting 10 blades, isolating cover and rubber ring, etc.
◆the main section adopts manually move out the brackets which is very convenient to change the blades

4. Scrap Winder (5.5KW)
◆It consists of base, the shaft and plate of edge material, friction wheel, supporting wheel chain, chain, decelerator and 5.5Kw electric machine.

5.Tension stand 
◆consist of base, pre-dividing shaft, bracket, press shaft, hydraulic damp device and
hydraulic shaft lifting the pres

6.Hydraulic recoiler (30KW)
◆It is consist of base, bearing frame, recoiler shaft, the expansion device of hydraulic recoiling, the expanded recoiling plate, movable arm bearing, supporting decelerator and motor.

7. Hydraulic unload car (1.5KW)
◆the car can carry the dividing coils and lift up and down and is movable 

8. Electrical control system: including the complete wire to installation as well as the electrical box to operate the whole lines

9. Hydraulic System :the hydraulic stand, pipes and the connect part

Applications:

ZJX-0.2-2X1250mm hydraulic slitting line is used for slitting the CR/HRC/stainless steel /galvanized to prepare for the next process.


Competitive Advantage:

1. it is driven by hydraulic and the electricity

2. convenient to operate

3. high production and competitive price.