Contact Platform Support
Help CenterSmooth Flat Aluminum Plate Anti-corrosion
Related Products
-
Antioxidant, Pre-stretch and Good Weldability Flat Aluminum Plate 6063-T651US$ 3 - 6$/MOQ: 1 Piece -
Deformation Antioxidant Growing Season Fast Flat Aluminum Plate 6082-T651US$ 3 - 6$/MOQ: 1 Ton
-
The Good Weldability Flat Aluminum Plate 6082-T651 Does Not Deform and TemperingUS$ 3 - 6$/MOQ: 1 Set
-
With Fast Growing Season Flat Aluminum Plate 6063-T651 Hot Rolled and Easy for PaintingUS$ 3 - 6$/MOQ: 1 Piece
-
Good Weldability Can Be Rolled, Tempered And Pre-stretched Flat Aluminum Plate 6061-T651US$ 3 - 6$/MOQ: 1 Set
Certification:ISO9001:2008;SGS TEST;GB/T 3880-2006, EN, ASTM
Smooth Flat Aluminum Plate Anti-corrosion
Specifications
1. Excellent for processing
2. High welding characteristic
3. Good corrosion-resistance
4. High Toughness
5. High polishing
Aluminum flat grade 6061-T6 of size 20~80MM with good oxidation resistance
Applications:
Used in the manufacture of heavy duty structures requiring good corrosion resistance, truck and marine components,
aircraft gun carriage ,railroad cars, furniture, tank fittings, general structural and high pressure applications,
wire products, and in pipelines.
Description:
1. Aluminum , Grade: 6061, T6 or T651
2. Hot rolled, Temper & Pre-stretching ,,T651
3.Production leadtime: 25~45days
4. Chemical composition:
|
Si |
Mn |
Cr |
Zn |
Mg |
Ti |
Fe |
Cu |
|
0.40~0.8 |
0.15max |
0.04~0.35 |
0.25 |
0.8~1.2 |
0.15 |
0.7 |
0.15~0.4 |
5. Tensile strength: σb (MPa):≥180
Yield strength :σ0.2 (MPa):≥110
Elongation rate: δ5 (%):≥14
Machinability:Machinability in the harder T 4 and T6 tempers is good. It is notably less easy to machine in
the annealed temper.
Forming:Easily cold worked and formed in the annealed condition. Stamping, bending, spinning, deep drawing
are all readily accomplished using standard methods.
Welding:The alloy has very good welding characteristics and may be welded by all of the common welding
techniques.
Gas tungsten arc welding is generally used for thin sections (less than 0.032\") and gas metal arc welding is
used for heavier sections. Use alloy 4043 filler wire for best results, although a decrease in T 6 properties will result.
Heat Treatment:Solution heat treat at 990 F for adequate time to allow for thorough heating and then water quench.
Precipitation hardening is done at 320 F for 18 hours and air cool, followed by 350 F for 8 hours and air cooling.
Forging:The alloy is capable of being hot forged at temperatures in the range of 900 F to 750 F.
Specifications:
|
Hot rolled condition |
aluminum plate(mm) |
Brand |
|
|
Thickness |
Width |
Length |
|
|
20~80 |
1200 |
2200~3000 |
Southwest |
Competitive Advantage:
Excellent for processing High welding characteristic Good corrosion-resistance High Toughness High polishing Easy for painting Good Oxidation resistance Non deformation Competitive price Fast production leadtime All the material are inspected with 3 times to meet the highly standards
Send Inquiry to This Supplier
You May Also Like
-
Geared Beam Trolley, Manual Geared TrolleyUS$ 22 - 380MOQ: 20 Sets
-
Non Sparking Chain Hoist,non Sparking Crane,safety Manual Monorail Hoist,crab,freight ElevatorUS$ 697 - 1,300MOQ: 1 Piece
-
Electric Swing Stage Lifting Equipment HoistUS$ 1 - 1,000MOQ: 1 Set
-
LFM-A Manual Chain HoistNegotiableMOQ: 1
-
TH Type Chain Bucket Elevator TH Hoist MachineUS$ 1,000 - 20,000MOQ: 1 Set
-
Mini Lever HoistNegotiableMOQ: 500 Sets
-
2T Light Duty Single Gear With 2 Hooks Hand PullerUS$ 1 - 10MOQ: 500 Pieces
-
Windlass for VesselUS$ 5,500 - 25,000MOQ: 10 Sets
-
Electric Hoist ModelUS$ 35,000 - 100,000MOQ: 1 Set
-
CE Approved Winch HoistNegotiableMOQ: 100 Sets
