Contact Platform Support
Help CenterHuge Calibre Hollowness Wall Winding Pipe Production Line
Related Products
Huge Calibre Hollowness Wall Winding Pipe Production Line
(SGB 1200 HDPE)
Products required specifications (mm): 400, 600, 800, 1000, 1200 Basic configurations:
1,SJ-90 single-screw extruder 1 set
l screw diameter: 90mm
l L:D ratio: 30:1
l main motor: 160KW, frequency control.
l stainless steel heating ring: 66KW.
l cooling method: air-cooled six areas x 0.25KW.
2,STG-u250 drying machine 1 set
l loading weight: 160Kg.
l electric heating power,hot-air drying: 9 KW.
3,ZJ600 automatic feeding machine 1 set
l Feeding capacity: 600 Kg / h Motor power: 2.2 KW.
l method: vacuum drawing, control mode: Time and material level meter.
4, mixing machine
l Power:: 2.2 KW capacity: 100 Kg
l time relay control, more uniform mixing of materials.
5, Mold (square pipe) 1 set
6, Vacuum shaping box 1 set
l box length: 6 meters.
l vacuum degree: 0-0 .07 Mpa (adjustable)
l vacuum pump: 3KW 1 set
l water pump: 2.2KW 1 set, 4KW 1 set
l back and forth shift motor: 1.1KW
l back and forth shift range: 600mm
l up and down shift range: 100mm
l Horizontal adjustment range: 30mm
7, Spray cooling tank
l Box Length: 4880mm.
l pump: 2.2KW 1 set.
8, Traction machine 1 set
l an effective traction length: 1600mm.
l traction speed: 0.5-6m/min.
l traction motor: 3KW frequency conversion motor.
9, 400-1200 winding forming machine 1 set
l forming mold size: 400, 600, 800, 1000, 1200
l inverter motor: 18.5KW, frequency control.
l cooling water pump: 1.5KW
l drying device: 1.5KW, vortex pump
10, forming regulating device: 1 set
11, 800-1600 cutting machine 1 set
l utting size: 400-1600 PLC programming control, automatic
l cutting motor: 7.5KW, 2800r/min
12, SJ-65/28 single-screw extruder 1 set
l screw diameter: 65
l L:D ratio: 30:1
l reducer: ZLYJ225 Hardened gear box.
l 37KW inverter motors, variable frequency control.
l stainless steel, cast aluminum heating ring: 20KW
l cooling method: air-cooled 4 zones x 0.18KW
l the machine can be moved up and down, left and right,back and forth.up and down moving by 2.2KW motor auto-lifting, left and right,back and forth moving by hand wheel, screw pole adjustment.
l ZJ400 vacuum feeding machine 1 set
l feeding capacity: 400Kg / h; motor power: 1.5KW.
l extrusion rubber machine 1 set
l mixing machine Power: 2.2KW ,Capacity: 100Kg ,balanced bracket 1200-2000 adjustable (hand wheel screw bar adjustment), discharge pipe length 4-8 meters.
About assembling, adjustment and after-sell service
1,The seller send engineers to help assembling and adjusting equipments in the buyers workshop, the buyer will be responsible for tickets cost and accommodation
2,The seller offer One-year quality guarantee for the equipments , the buyer must operate the equipment in proper way(Wearing parts and non-appropriative parts not in warranty. such as: belts, chains, bearings, blades, etc.)
3,The seller offer the buyer directions for producing pipe products and whole set of technics
Send Inquiry to This Supplier
You May Also Like
-
Candy Cane Plastic Extruder for Crafting Christmas Decorations and Sweets DisplaysUS$ 100000.00MOQ: 1 Set -
Meltblown PP Non-Woven Fabric Making Machine for Face Mask N95 Medical MaskNegotiableMOQ: 1
-
PVC Monofilament Extruding Line(Used), Monofilament Machine, Monofilament EquipmentUS$ 8 - 10MOQ: 1 Piece
-
Production Line Used for Granules Powder Material FeederUS$ 650 - 800MOQ: 1 Set
-
TZ Brand Plastic Filament Extruding MachineNegotiableMOQ: 1 Set
-
Mono Layer Extrusion Air Bubble Film Extrusion LineryUS$ 20,000 - 60,000MOQ: 1 Set
-
LIANJI Plastic Extrusion Blow Molding MachineUS$ 99 - 199MOQ: 1 Set
-
PP/HDPE Flat Yarn Making Machines for Woven Bag/Cement Bag/Container Bag PlantsUS$ 8,500 - 8,500MOQ: 1 Set
-
Chinese Waste Plastic Board Recycling MachineUS$ 40,000 - 48,000MOQ: 1 Set
-
The Waste Tire Recycling Production Line With CE ISO SGSUS$ 20,000 - 80,000MOQ: 1 Set
