Contact Platform Support
Help CenterAll Aluminum Conductor (AAC)
Related Products
1. Applications
AAC and ACSR have been widely used in power transmission lines with various voltage levels, because they have such good characteristics as simple structure, convenient installation and maintenance, low cost large transmission capacity. And they are also suitable for laying across rivers valleys and the places where special geographical features exist.
2. Service Performance
(1). The permissible long-time operating temperature for aerial conductor is 70oC.
(2). Under the circumstance that rare climate is occuring and ice coverage rate low in heavy ice area, the biggest stress of cable at the lowest point of the sag should not exceed 60% of the short-time destructive power.
(3). When connecting conductors, the conductor beside the connecting tube cant be prominent. Otherwise, the force on the operating conductors will be unbalanced. After connectors are install, the connecting tube should be painted by moisture-proof varnish in order to protect it from corrosion.
3. Product Performance
(1). The electrical performance of AAC and ACSR is indicated in DC(20oC). The resistivity of the hard aluminum wire for stranded wires is not greater than 28.264 nΩ. M of international standard value.
(2). The rated tensile strength of AAC is denoted with the result of total cross-section of all aluminum conductors multiplied by min. Tensile of corresponding size specified in the standard for aluminum wire.
(3). The rated tensile strengh of ACSR is denoted with sum of all aluminum conductorstensile strength and steels tensile strength.
(4). The tensile strength of all aluminum conductors is denoted with the result of all cross-sections of aluminum conductors multiplied by min. Tensile strength of corresponding size specified in the standard for aluminum wire.
(5). The tensile strength of all steel wire is denoted with the result of all cross-sections of steel wires multiplied by the stress at 1% elongation of corresponding size specified in the standard for steel wire.
4. Material Standard
(1). The hard aluminum conductor used for AAC and ACSR conforms to the standard GB/T 17048-1997(equivalent to IEC 60889: 1987).
(2). The zinc coated steel wire used for ACSR conforms to IEC 60888: 1987.
(3). Production can be arranged according to customers requirements for material standard, etc.
Send Inquiry to This Supplier
You May Also Like
-
Fpc Cable Ffc Cable EDP Cable LVDS Harness VBYONE Harness Coaxial CableUS$ 7 - 10MOQ: 100 Units -
Electronic Wire 450/750vUS$ 1 - 10000MOQ: 1 Piece
-
4/8/16/32CH Channels Multi Cable With Wheel/6 UTP Multipair CableUS$ 500 - 800MOQ: 10 Pieces
-
High-Temperature IEC-60317 Standard Electric Wire ISO9001 for Certified Enameled Aluminum Wire Solid Manufacturer Direct PricesUS$ 3.45 - 3.96MOQ: 500 Kilograms
-
2pin 4pin Black Pigtail Plastics Waterproof IP65 IP67 IP68 LED Connector Male Female Plug With Screw And NutNegotiableMOQ: 1000 Pieces
-
Fireproof CableNegotiableMOQ: 500 Meters
-
QYYEQ Electric Submersile Power Cable With Excellent Oil Resistance PropertiesUS$ 10 - 30MOQ: 100 Meters
-
Wire and CableNegotiableMOQ: 2000 Rolls
-
Factory Price High Quality 1mm 1.5mm 2mm 2.5mm 4mm Aluminum Enamelled Winding Electrical WireUS$ 3.23 - 3.96MOQ: 1000 Kilograms
-
Advanced Self-Regulating Heating Cable for Freeze Protection & Temperature MaintenanceUS$ 0.98MOQ: 10 Meters
