Contact Platform Support
Help CenterSell HD-10D Power Plug Integrated Tester
Related Products
-
Sell HD-10E Power Plug Integrated TesterNegotiableMOQ: 1 Piece -
Sell HD-28 Power Plug Integrated TesterNegotiableMOQ: 1 Piece
-
Sell HD-104 Power Plug Integrated TesterNegotiableMOQ: 1 Piece
-
Sell HD-203 High-volt&Breakover TesterNegotiableMOQ: 1 Piece
-
Sell HD-303A Polarity TesterNegotiableMOQ: 1 Piece
Product explanation:
This tester is an integrated tester for plug.It is used to test the continuity,polarity,insulation,high-volt,leakage current,E-wire high-voltage of power plug.It meets the requirements of many international standards such as BIS, UL, CSA, VDE, BSI, DIN, CCC, IEC,etc.It is a totally automatic testing machine make your operation more convenient and simple.
Features:
* All of the test subjects will done automatically.
* The inner/outer high-volt output value can be adjusted separately.
* Test speed is quickly,all test subjects will be achieved in 2 seconds.
* The PLC control system comes from Mitsubishi,Made In Japan.
* The relay comes from Schneider,Made In French.
* If the specimen is incompetent,there is a alarm by buzzer and light.
* If the specimen is incompetent,this machine will stop at once and show you which subject is incompetent.Until you push the emergency button it will restart a new test.And a switch with key can be made to order to replace the high-volt starting button,it is very useful,because when a alarm happen,the operaters can not restart this machine,only when the managers have checked over and restart it by key the machine will be working again.
* When test over,the sample will be pushed out automatically,and a “T” or other characters will be marked on it(English characters only).
* A big current with 0~30A will be applied on E wire to check whether it is eligible.
Technical parameter:
|
Polarity test |
Test E,L,N wires in sequence |
|
Insulation test high-volt |
DC 500V +-3% |
|
Insulation resistance |
5,100MΩ(can be made to order) |
|
Inner high-volt |
0~5KV +-3% (adjustable) |
|
Inner leakage current |
2,5,10mA(can be made to order) |
|
Outer high-volt |
0~5KV +-3% (adjustable) |
|
Outer leakage current |
2,5,10mA(can be made to order) |
|
Rated power |
500VA |
|
E wire test current |
0~30A(adjustable) |
|
Length of sample |
less than 10m which 1.5mm2 square |
|
Cylinder power |
compressed air with 0.4 to 0.6Mpa |
|
Dimensions |
1200mm W,900mm D,1540mm H |
|
Power source |
AC 220V +-10%,50Hz |
|
Weight |
45 kg, approximate |
NOTICE:
1,Inner high-volt is applied between L,N,E wires,and the outer high-volt is applied between L,N,E wires and jacket.
2,Both 3-wire and 2-wire power plug can be tested by this machine.
Send Inquiry to This Supplier
You May Also Like
-
Endress+Hauser E+H Compact Conductivity Device Smartec CLD18-BGGENegotiableMOQ: 1 Piece
-
Computer Control Hydraulic Universal Testing MachineNegotiableMOQ: 1 Set
-
Universal Testing MachineNegotiableMOQ: 2500 Pieces
-
Hydraulic Plastic Flange Connections Cover Plugs SHF SeriesUS$ 0.22 - 0.28MOQ: 2500 Pieces
-
Gates 550C 550U U550 U-550 U508 U-508 Japan Unitta U-550 Belt Tension Meter New U-508 Belt Tension Meter Upgraded Version U550US$ 1 - 900MOQ: 1 Piece
-
Vertical Rod Type Floor-type Electrostatic Discharge Tester / Electrostatic Discharge Device for Human BodyUS$ 20 - 93MOQ: 1 Piece
-
Analytical Balanace.scale ,weichengya Laboratory SupplierUS$ 10 - 35MOQ: 10 Sets
-
Smart MD-3051 Online Density Meter With 4-20mA OutputUS$ 2,380 - 2,500MOQ: 1 Unit
-
5W-300W Sun Simulator Watt Testing 30% Off / Xenon Lamp Sun Simulator Free Sent / Sun Simulator TestingUS$ 7,500 - 10,000MOQ: 1 Set
-
New Design Measuring Meter With Best PerforanceUS$ 1,000 - 1,200MOQ: 1 Piece
