One homebrew Co2 Keg Charger kit +One Co2 cartridge + one Ball Lock fitting

Feature:

Portable--Small,lightweight,no tanks or hoses.

Fast--Charges kegs in seconds.

Easy to Use--Trigger Valve allows precise control of gas.

Description:

A portable method of dispensing your kegs on the go. No longer do you have to lug around your heavy, unbalanced CO2 tank. This hand held CO2 unit pushes out your beer using small 16 gram CO2 cartridges. This unit works with ball lock kegs. Uses 2-5 16g cartridges to push 5 gallons of beer. It will not work for carbonating your beer because of the small amount of CO2 in each cartridge.  Even though this is an unregulated dispensing system it is quite easy to get good dispensing pressure. 
 

Caution:
 The cartridges contain liquid co2 that will dispense at over 600PSI. With that in mind, we suggest having the faucet open before pushing more co2 into the keg, and using very short bursts. Also, do not push the inject lever when not hooked up to a keg as you will put over 600PSI into the quick disconnect and will blow the top threads off.

Warning:Never attach ball/pin valve to inflator first.It can cause ball/pin valve to be over pressurised and fail.Always attach to keg first.