144W SMD 5730 LED Ceiling Lamp Dimmable With Remote Controller

LED Ceiling Lamp 144W SMD 5730 180 ° Beam Angle With Romote Controller Dimmable

 Quick Details

Description

1 . Beam angle 180 °  .

2 . The lamp is dimmable with a Remote controller .

3 . 2700K 4200K 6400K , Three color Temp. is optional with the remote controller

4 . SDCM < 5 ,CRI > 80 Ra ,Luminous efficiency > 100 .
5 . The average lifetime of our LED bulb is at least 30 000h , we garantee the quality for 3 years .
6 . Living up to the IEC62031 : 2008 & 62560 standard .
7 . Saving 80% electricity compared to traditional grille lamp with fluorescent tube .

8 . SMD 5730 LED Chip , Epistar .
9 . Using aluminum as pedestal , haveing excellent heat conduction ,160 W / ( m.K ) .

10 . Using constant current driver with IC to make sure the led chip life .

11 . We choose very good driver supplier like Meanwell,mosopower to have constact current output to the LED chip , which is also safe .
12 . Easy to install , can be Surface Mounted on the ceiling .
13 . All products are output strictly under ISO 9001 Quality Management System and CE satisfied .
14 . Voltage : all of our LED products supply wide range voltage input 85 - 265V .5 . Can start under the condition of - 30 ℃ and low voltage .
15 . No flicker , No noise , No electromagnetic interference ( EMI ) .

16 . Using PVC lampshade , Good light transmittance .

17 . 7MM Thickness , the circular arc design for the edge , very simple and fashionable .

Lamp parameters

 
Quality Control ( QC )
 
1 . Strict raw materials inspection .
2 . Technical parameter adjustment :
     1 ) Technicians will tune the technical parameters of each items to make sure the Wattage , P.F.living up to the requirement of customer
     2 ) Destructive test , light it in the oven to be under the conditions of high temperature and high voltage
     3 ) Turn on off test , to make sure the life time of the lamp
     4 ) Start test in low temperature and low voltage ( light in the fridge )
3 . In the mass production , our QC will take selective examination on every step , such as Plug-in , Wave soldering , PCB test , Tube glue , Assembly ,