Professional 301 Stainless Steel Strip Coil For Conveyor Belt / Mechanical Spring
Certification:SGS BIS ISO
Professional 301 Stainless Steel Strip Coil For Conveyor Belt / Mechanical Spring
Introduction to SUS301
Austenitic steel with Ni and Cr lower than 304. The tensile strengthen and hardness will be higher by cold rolled processing, at the same time, it will be magnetic.
Application: Used for elastic element, structure opponents, conveyor belt, and mechanical spring.
Chemical Composition
| Steel Grade | C (%) | Mn (%) | Ni (%) | Cr (%) |
| 301 | <0.15 | <2.0 | 6.0-8.0 | 16.0-18.0 |
Mechanical Properties
| Steel Grade | Y.S (Mpa) | T.S (Mpa) | E.L (%) | Hardness |
| 301 | >205 | >520 | >40 | <95 (HRB) |
| 301 1/2 H | >510 | >900 | - | <310 (HRB) |
| 301 H | >1030 | >1320 | - | <430 (HRB) |
Stainless Steel Strip Coil - Finishes - applications:
NO.1
Hot rolled, annealed, pickled, normally used as cold rolled material, industrial tanks and devices for chemical industry, etc
NO.2D
Cold rolled, annealed, pickled and dull finish products. Mainly used as automotive components; deep drawing parts, building components and pipes, etc.
NO.2B
Cold rolled, annealed, pickled, and skin-passed to give an appropriate luster at final stage. Their glossiness and flatness are better than No.2D products. They can be competent for almost all the applications of cold-rolled stainless steel, such as kitchen and bathroom ware, surface polishing, furniture structural parts, etc.
NO.3
The products achieved by grinding of No.2D surface with No.100~120 grinding belt. They have better glossiness and discontinuous coarse grain, and are used in inside and outside decoration of buildings, electrical appliance and kitchen installation, etc.
NO.4
The products achieved by grinding of No.2D surface with No.150~320 grinding belt. They have better glossiness and discontinuous coarse grain, but their grain is finer than No.3. They are used in elevator decoration, kitchen installation, inside and outside decoration of buildings, electrical appliance front panel, etc.
HL
The products achieved by continuous grinding of No.2D surface with polishing abrasive belt with appropriate grain size. They have relatively long continuous grinding stripe (further divided into No.150~320), and are mainly used in building decoration and elevator decoration, etc.
BA
Cold-rolled, bright annealed and skin passed products with extremely good surface glossiness and high reflectivity are used in building decoration, home appliance product and kitchen installation, etc.
Dull finish
The products achieved by appropriate rolling of No.2D or No.2B surface with dull roll. They have matte finish and are used in building decoration and elevator decoration.
Processing of Stainless steel Strip Coil :
Slitting:
Send Inquiry to This Supplier
You May Also Like
-
Cost-Effective Copper Wire Recycling Machine for Cable ScrapNegotiableMOQ: 1 Set
-
40T Electric Tilting Machine for Heavy Parts RotationNegotiableMOQ: 1 Set
-
Drum Wood Shredder Tree Branches Wood Chips for Mulch & FuelNegotiableMOQ: 1 Set
-
High Efficiency Energy Saving Fluidized Bed Dip Powder Coating Equipment Eco Friendly for Refrigerator ShelvesUS$ 2000 - 40000MOQ: 1 Set
-
Metal Zipper Chemical Cold Plating Machine (13 Tanks)US$ 1,000 - 10,000MOQ: 1 Set
-
Made In China JOY 1330/1325 Portable Air Plasma Cutting MachineUS$ 2,000 - 6,900MOQ: 1 Set
-
Automatic Infrared Length Cutting SystemNegotiableMOQ: 1 Set
-
Factory Supply Stainless Steel Sheet Polishing MachinesUS$ 2,000 - 5,000MOQ: 1 Set
-
Cheap Copper Wire Scrap 99.99 Recycling MachineUS$ 13,000 - 16,999MOQ: 1 Set
-
High Output Recycling Copper Wire Machine/Wire Recycling Machine/Copper Wire Recycling MachineUS$ 2,000 - 15,000MOQ: 1 Set