Aerated Block Cutting Machine

First, outline: The DFQ ground turn over type cutter is constructs thenortheast design institute basis domestic situation by Chinaindependently to develop the development, in domestic obtained abetter promotion. In 1995 the northeast courtyard has made theimprovement to the original cutter flaw, enable this type to obtainhas further consummated, this company in the northeast courtyardimprovement design type, according to produced the factory the servicecondition to make the improvement and the consummation, enable thistype the superiority to obtain has further displayed. Second, workway: Recuperates in advance Base body, Base body will hang from thefixed-point driving to turns on the turnplate to take off the moldframe, will turn the turnplate to turn over 90 through the hydraulicgear, again by longitudinal will cut the organization and the acrosscutting organization completes six cuts,Base body will cut later to turnover 90 by the hydraulic gear to return to the home position again,will complete time cuts the cycle. Third, main characteristic: 1st,cuts the steel Silk is short, cuts the precision to be high. 2nd, steams recuperates Base body does not stick, to produces thegranulated substance air entrainment artificial brick to be moreadvantageous. 3rd, may produce the plate, does not need to break off the trigger. 4th, cuts the waste material all to be possible the sales commission,after the artificial brick to steam recuperates does not have thewaste material. 5th, the operation control is simple, may realize the automaticcontrol.