High Tension Composite Suspension Insulator , 10kv Overhead Line Insulators

Delivery Time:Start from 10 days
Certification:ISO ; SGS, 3rd Party Independent testing lab type test reports

High Tension Composite Suspension Insulator , 10kv Overhead Line Insulators

Specifications:

Dimensions and Characteristics of 10kV(12kV)composite Suspension Insulator

Figure. No	Model	Rated Voltage	Specified Mechanical Load	Coupling Size	Section Length	Insulating length	Minimum Creepage	Full-Wave Impulse Withstand Voltage (Peak)	1 Min Wet Power Frequency Withstand Voltage	Weight (for Reference)
		kV	kN		H mm	h mm	L mm	≥ kV	≥ kV	kg
1.15-1	FXBW-10/70-WT-A	10	70	16	340±5	163	400	95	60	1.5
1.15-2	FXBW-10/70-DT-A	10	70	16	343±5	163	400	95	60	1.3
1.15-3	FXBW-10/70-WD	10	70	16	322±5	159	415	95	60	1.3
1.15-4	FXBW-10/70-DT-B	10	70	16	312±5	159	415	95	60	1.1
1.15-5	FXBW-10/70-WT-B	10	70	16	319±5	159	415	95	60	1.2
1.15-6	FXBW-10/70-UD-A	10	70	/	318±5	159	415	95	60	1.2
1.15-7	FXBW-10/70-UD-B	10	70	/	360±5	158	600	95	60	1.4
1.15-8	FXBW-10/70-UD-C	10	70	/	365±5	163	400	95	60	1.4
1.15-9	FXBW-10/70- WT -C	10	70	16	296±5	163	460	95	60	1.4
1.15-10	FXBW-10/70- TT -A	10	70	16	296±5	163	460	95	60	1.4
1.15-11	FXBW-10/70- PT -A	10	20	16	375±5	163	400	95	60	1.3

Description:

1, 10kV tension suspension insulators are widely used in overhead transmission lines and substations

2, Dead end fittings are up to the requirements from the clients, usually we use ball, socket, tongue, clevis for tension insulators with forged steel or cast steel. The dimensions and coupling size can be exactly according to the specification requirements from the utilities.

3, The silicon rubber color of the insulators are also up to the requirements from the clients and all the silicon rubber materials past 5000 hours aging test silicon content test and hydrophobicity test.

4, ECR core rods are used in all the insulators, so we can guarantee a very good mechanical strength and anti-acid pollution performance for the insulators.

5, All our insulators were type tested and design tested in accordance with IEC61109, maximum RIV is 100µV when tested at 1MHz and10% over nominal line ground voltage for indicated system voltage.

6, All the 10kV tension suspension insulators are without corona ring

Applications:

1, 10kV  overhead transmission power lines.

2, 10kV substations

3, 10kV distribution lines

Advantages:

This kind of products have the following characters and advantages:

1) The silicon rubber rain shed, designed according to the aerodynamics principle, use the whole-moulding method, to make sure the validity of total creepage distance under every climate and nasty conditions, as well as improved the pollution discharge of the insulators.

2) The fiber rod uses the ECR high-