Home > Products > RTV Silicone Coatings > Room Temperature Vulcanized PRTV RTV Silicone Coatings For Ceramic Insulators
Room Temperature Vulcanized PRTV RTV Silicone Coatings For Ceramic Insulators
- 0 Metric Ton / Metric Tons per Month
- T/T L/C D/P D/A
- 7 days
- graphitized carburant,carbon additive,recarburizer,carburant,GPC,Artificial graphite powder
- graphitized carburant,carbon additive,recarburizer,carburant,GPC,Artificial graphite powder
- graphitized carburant,carbon additive,recarburizer,carburant,GPC,graphite powder
- graphitized carburant,carbon additive,recarburizer,carburant,GPC,graphite powder
- calcined petroleum coke/CPC/GPC for carbon cored wire making
- calcined petroleum coke/CPC/GPC for carbon cored wire
Product Details
Brand Name: | Changgong | Place of Origin: | China | Model Number: | RTV-PRTV-SRTV |
Product Description
Room Temperature Vulcanized PRTV RTV Silicone Coatings For Ceramic Insulators
Technical Spefications:
No. | properties | Test Method | unit | Minimum requirement |
Guaranteed Value |
1 | Solid content | DLT627-2012 | ≥%30 | 51 | |
2 | Solid volume | IEC | ≥%40 | / | |
3 | Shelf life | -- | Month | 12 | 12 Months |
4 | Tack free time | Minute | 45 | 25 Minutes | |
5 | Viscosity | DLT627-2012 | 500cp…..3000cp | / | |
6 | Specific gravity | DLT627-2012 | 0.5g/cm³….2g/cm³ | 0.92-1.42 g/cm3 | |
7 | Flash point | DLT627-2012 | 30°C…………45°c | 35 °c | |
8 | Skin-over time at 23°c | DLT627-2012 | 9min….40min | 20 min | |
9 | Water replellence | DLT627-2012 | 105°C…..130°C | 113.8° | |
10 | Arc resistance | DLT627-2012 | 180s ≥ | 191s | |
11 | Volume resistivity | DLT627-2012 | 1.2*10¹² | 6.05*1013 | |
12 | Application temp range | DLT627-2012 | -10°c…….+60°C | -50-200°C | |
13 | Colour material | -- | grey | GREY | |
14 | Dielectric constant at 50 HZ | DLT627-2012 | ≤3 | 2.0-2.1 | |
15 | Dissipation factor at 50 HZ | DLT627-2012 | ≤0.4 | 0.2-0.23 | |
16 | Contamination flashover resistance | DLT627-2012 |
U1(coated)/ U2(un coated) ≥1.5 |
2.03 | |
17 | Adhesion Ability Test | IEEE std 1523 | Pass | PASS | |
18 | Salt fog test | DLT627-2012 | h | 1000H | 5000H |
19 | Tensile strength | DLT627-2012 | N/mm² | 3 | 4.24 N/mm2 |
20 | Tear strength | DLT627-2012 | N/mm | 9 | 10.2 N/mm |
No. | Subject | Guaranteed Value |
1 | Solid Content by Weight | 51 |
2 | Solid Content by Volume | / |
3 | Density -Uncured | 0.92 |
4 | Density Cured |
1.42 |
Question and answers:
1, How long you can guarantee your PRTV coating on ceramic insulators of substation equipments?
Answer : 15 years
2, How long the client will need to wash their equipment after PRTV coating in below mentioned areas?
Answer:
Polluted Areas | Estimated time need to wash again after using our RTV / PRTV products (years) |
Cement Factories | 10-12 |
Petrochemical Plants | 12-13 |
Heavy Polluted Areas | 12-13 |
Polluted Areas | 15 |
3, If he minimum required thickness of PRTV on ceramic insulators of high voltage equipments in substations is
500 micron (Dry Film Thickness - DFT). To reach to this thickness, how much is your recommended weight for
each square meter?
Answer:1.4 kg/m2
4, What is your estimated time to do the PRTV coating of each bay of substations? ( line bay , transformer bay …)
Answer: