Home > Products > Servo Motor Drive > Drawing Frame Servo Motor Drive Electromechanical 100w With Incremental Encoder
Drawing Frame Servo Motor Drive Electromechanical 100w With Incremental Encoder
- 0 Piece / Pieces per Month
- T/T L/C D/P D/A
- 7 days
-
Original GO SWITCH switch
-
Original TOPWORX valve position feedback switch
-
Original TOPWORX switch
-
New arrival curved glass touch panel switch ZigBee aluminum frame Tuya smart home light wall switch
-
Xiaomi Mijia Smart Light Sensor Zigbee 3.0 Intelligent Linkage Waterproof Work With Smart Multimode Gateway mi home
-
Xiaomi Mijia Smart Switch Wall Switch Single & Dual Open BT Remoto Control Voice Control Smart Light for Mi Home APP
Product Details
| Brand Name: | Maxsine | Place of Origin: | China | Model Number: | TL01-B0S3 |
Product Description
Certification:CE / ISO9001
Drawing Frame Servo Motor Drive Electromechanical 100w With Incremental Encoder
Description:
EP1C PLUS AC servo drive and AC servo control system have become the basic techniques for accomplishing automation control technology in current industry field. It is high-speed and high-precision servo drive which is widely used in industrial automatic field. There are 16 models in this series with power range from 0.1kw to 7.5kw.
Characteristics:
1. High-speed performance of the control circuit loop.
2. EP1C Plus Series software compensates torque ripple, to effectively improve the torque accuracy.
3. Gain tuning, smooth motor operation and software analysis / monitor function.
4. Differential drive connection can support 1M pulse input / single-ended drive optional (convenient for PLC connection). Both instruction input and feedback output frequency can reach 1Mpps, which can achieve high resolution running. Special order version supports 24V NPN/PNP single-ended drive with the highest frequency 200kHz.
5. Built-in automatic high-frequency resonance suppression.
6. Vibration filter can remove the natural vibration frequency, and sharply reduce the swing of axis when stops. Applicable frequency is 1-100Hz.
Specifications:
| Model | TL01-B0S3 | ||
| Input power supply | Single phase AC220V -15%～+10% 50/60Hz | ||
| Environment | Temperature | Operation:0℃～40℃ Storage:-40℃～50℃ | |
| Humidity |
Operation:40%～80%(non-condensing) Storage:93% or less(non-condensing) |
||
| Atmospheric pressure | 86kPa～106kPa | ||
| IP rating | IP20 | ||
| Control of main circuit | vector control | ||
| Regeneration | built-out | ||
| Feedback type | 23bitINC/ABSencoder | ||
| Control modes | Position, Speed, Torque | ||
| Digital inputs | Five programmable input terminals (optical isolation)Function SRVON ,ACLR ,CW Drive inhibition,CCW Drive inhibition,CW Torque inhibition, CCW Torque inhibition,Emergency Stop,Electronic gear selection 1,electronic gear selection2,Position deviation clear,pulse input inhibition | ||
| Digital outputs | 3 Programmable input terminals(Optical Isolation) Function:SRDY,alarm,Finish Orientation Output,Reach Speed,electro-magnetic brake,Torque restrictions | ||
| Encoder signal outputs | A,B,Z Differential output,Z signal open-collector output | ||
| Position | Input frequency | differential input:≤1000kHz(kpps), single-ended input:≤200kHz(kpps) | |
| Command modes | Pulse+Signal,CCW Pulse/CW Pulse, orthogonal Pulse | ||
| Electronic gear ratio | 1～32767/1～32767 | ||
| Speed | Analog command input | -10V～+10V, Input impedance10kΩ | |
| Acceleration/deceleration command | Parameter setting | ||
| Command source | Analog quantity | ||
| Torque | Analog command input | -10V～+10V,Input impedance 10kΩ | |
| Speed limit | Parameter setting | ||
| Command source | Analog quantity | ||
| Monitor function | Revolving Speed,Current Position,Positional Deviation,Motor Torque,Motor Current,Instructions Pulse Frequency,busbar voltage,internal temperature of module etc. | ||
| Protection function | Overspeed, Overvoltage,Overcurrent,Overload,Abnormal of main Power,Abnormal Encoder,out of tolerance etc. | ||
Applications:
