High Efficiency Pwm Solar Panel Controllers 12v Auto With LCD Screen 60A

Delivery Time:10 work days (According to the order quantity )
Certification:CE FCC

pwm Solar Charger Controller for solar home system using 12/24v Auto with LCD screen 60A

Model : PWM-60248

The Features are listed below:

Automatic identification system Voltage, 12V 24V auto recognition

Humanized LCD display and double button operation of man-machine interface.

Completed technical data for setup and modify.

High efficiency intelligent PWM 3stage charging.

The load control mode can be selected, the timer function can be reset for street light at night.

Reliable over voltage protection, short circuit, over load protection, overcharge protection, over-discharge protection.

Accurate temperature compensation, correcting the charging and discharging voltage automatically, improving the battery lifetime.

Roundly reverse connected protection.

Solar panels, battery, solar charge controller positive poles are all connected together, adopting negative MOSFET in series control circuit.

System Voltage	12v/24v 24v/48v
Max. Input Voltage of solar panel	55V
Self - consumption	≤13mA
Max. Cahrge current	30A		40A		50A		60A
Max. Discharge current	30A		40A		50A		60A
LVD	11.0V ADJ 9V……12V,*2 24V *4 48V
LVR	12.6V ADJ 11V ……13.5V, *2 24V *4 48V
Float Voltage	13.8 ADJ 13V……15V,*2 24V *4 48V
Boost charging	14.4V,*2 24V*4 48V Battery Voltage less than 12V start boost charging 2 hours.
Battery Over Voltage Protecion	16.5V ,*2 24V *4 48V
Reverse Connection Protection	Yes
Load Over Current Protection	Yes,each two minutes restart once
Charge Type	PWM
Temperature Compensation	—24mV/℃ for 12V system , *2 24V *4 48V
Working Temperature	—20℃ ——+55℃
Terminal Scale	28-10AWG
Waterproof grade	IP 32
Size	168mm*92mm*41.5mm
Weight	320g

Controller Connection

1)All terminals are in tight status after factory, in

order to well connected,please loose all terminals

at first.

2)The following order of connection please do not free

change, or cause system voltage recognition fault.

3)As figure, first connected the battery to controller

correct poles . In order to avoid short circuit,please

screw the cable of battery to the controller in advance,

then connected to battery poles secondly, if your

connection is correct, the LCD displaying will Show

battery voltage and other technical data. If LCD no

indicate, please check the fault. The length of cable

between battery and controller as shorter as possible.

Suggest to 30CM-100CM.

Warning:

For some force to ground system such as solar

communication system, portable solar system, they are negative

ground connected, at this time please do not positive connected, or can cause

short circuit.